Products > Test Equipment

EEVBlog 121GW Multimeter Firmware Details

<< < (23/62) > >>

1anX:

--- Quote from: CDaniel on November 07, 2018, 06:24:58 am ---A delayed beep is annoying , or is fast or not at all ... Fluke behavior is what should be expected from a decent multimeter .
When you work on a board you want to find fast the shorted semiconductors , you don't have time dicking around waiting for the meter ... and you don't want to switch all the time to continuity mode and back because is faster or has the beep  :-\.
For those who don't like the beep should be very easy to add a way to disable/enable it .

--- End quote ---

Hi CDaniel, can I suggest that you move your comments and feedback to the "121GW Issues" thread. That thread is for reporting issues that you would like to see addressed.

https://www.eevblog.com/forum/testgear/eevblog-121gw-multimeter-issues/

This thread is for "Firmware Details" and would be the right thread if you were to offer up the firmware code for the meter operation you describe. Try the Issues thread and you may get your issue with the meter considered!

lowimpedance:

--- Quote from: Sharp on November 08, 2018, 08:44:14 pm ---Just received my 121GW it has v1.54 FW -  just for info - I have no idea what have been changed in the FW

--- End quote ---
Or perhaps you have 1.53 going by the recent 1.52 release reporting as 1.53  :D :P.
Seriously though if true that's a short life for 1.52 1.53. Some release notes may be handy here.

gdewitte:
Second the call for release notes. Could someone please tell us what the hell is going on?

exe:
BTW, I wonder if someone wants to actually write some firmware for it.

I recently tried ChibiOS and made a very trivial hello-world interface using threads+queues. So far I like it much more than CubeMX. I may want to try to write firmware using it, threads and C++. If someone wants to join let me know.

PeterL:

--- Quote from: exe on November 09, 2018, 09:40:35 am ---BTW, I wonder if someone wants to actually write some firmware for it.

I recently tried ChibiOS and made a very trivial hello-world interface using threads+queues. So far I like it much more than CubeMX. I may want to try to write firmware using it, threads and C++. If someone wants to join let me know.

--- End quote ---
Did you actually run your own code on the 121GW? And if so can you revert back to stock firmware afterwards?

If that's possible, and you could provide some instructions to do so, I'll bet it would just be a matter of time before others hop on.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod