Products > Test Equipment
Eevblog 235 meter.
Russtopher:
Hello
When I turn on my meter, the display gives me this prompt, InEr and just beeps. Anyone ever have this issue before. What would cause this?
Thank you
Russ
tooki:
The user manual explains it. Is it occurring when the condition mentioned in the manual is not present?
Antrus:
Most likely the current jacks are dirty. You need to wipe them with a cotton swab with alcohol. They are affected by any dirt.
Russtopher:
Hello
The user manual does not address this issue. It happens as soon as it is turned on, with or without the leads plugged in. 🤔
Thank You
Russ
DaneLaw:
--- Quote from: Russtopher on May 19, 2024, 02:21:33 pm ---Hello
The user manual does not address this issue. It happens as soon as it is turned on, with or without the leads plugged in. 🤔
--- End quote ---
Have you used the "search" feature, before starting a post?
Looks like it's been debated five ways to Sunday on Brymen meters..
https://www.eevblog.com/forum/search2/ - InEr -
Navigation
[0] Message Index
[#] Next page
Go to full version