| Products > Test Equipment |
| Open source EEZ Studio for accessing your (SCPI) instruments |
| << < (29/32) > >> |
| kawal:
--- Quote from: prasimix on July 15, 2022, 08:39:21 am --- Feel free to open a new feature request in GitHub: https://github.com/eez-open/studio/issues/new --- End quote --- prasimix Thanks - I did - great job on EEZE studio . Its real easy to use and very useful. Kawal |
| kawal:
I found a temporary solution for my problem - display Mhz as us Ghz as ms. I added padding to the data and adjusted the sampling rate and timescale based on the scanned frequencies. If the applications allowed just to change the units from ps=Hz ns=kHz us= Mhz and ms=GHz it would be 75% of my needs. |
| kawal:
making a lot of progress on the 8714ET added remote functions : Averaging on/off and number of samples 1.....64 bandwidth selection 15Hz...6500Hz Start and stop frequency - your choice - defaults populate from current as read from instrument Frequency center Span number of data points A general setup function that will ask you of most of the settings. Changed the padding to use the Y value of the 1st data point instead of a fixed -80dB next will be to stitch graphs if more than 1601 data points are needed |
| CScott:
I'd like to add an instrument to EEZ Studio. The documentation for this seems to be here https://www.envox.eu/studio/create-an-instrument-extension/project-items/settings/ My problem is that documentation seems to bear no relation to the current version of the software 0.9.97. The difference is so large that I'm not sure if there is something wrong with my installation or the documentation is out of date, or that I'm dumber than a rock. As an example the docs show the screen for new Project Features "esp_settings-new_project.png" attached. What I see is this "MyNewProject.jpg" attached. There is just no correlation between these. Can someone point me in the right direction please? |
| prasimix:
Hi, and sorry for huge delay in response (I never received a notification about a new message). You're completely right. The existing documentation is obsolete, but we are in the process of writing complete documentation for the latest version of EEZ Studio, so an updated version of the instructions for creating IEXT can be expected soon. Thank you for following us and for your patience. The progress of creating new documentation can be followed at https://www.envox.eu/eez-studio-docs/ |
| Navigation |
| Message Index |
| Next page |
| Previous page |