Products > Test Equipment
Keysight EL30000 DC load buyers warning / mini review
<< < (8/10) > >>
ImSparticus:
Many Thanks for the quick reply. I may still get one on loan but will discuss with the sales engineer regards known issues.

I have just been looking at the BK 8601 and downloaded the software to take a peek.


Thanks
niner_007:
Any update from anyone regarding this DC load? Has the issues been fixed?
bsodmike:
I was sent this firmware by Keysight a while back, and unfortunately have not had any time to test it.  You can grab it here: https://drive.google.com/file/d/1IkAMjMfkPTkOfbA56MVlp3Nq419CQ1iz/view?usp=sharing

I've also verified the MD5 checksum provided by Keysight

--- Code: ---[11:36] M1MaxMacBookPro.local:keysight_EL3000_beta_khew_13MAY2022 | md5 Jati750B_9.2.7_1.0.6_17_114_dfd9d5d1396b24671c2adaa64d85875e.dfu
MD5 (Jati750B_9.2.7_1.0.6_17_114_dfd9d5d1396b24671c2adaa64d85875e.dfu) = dfd9d5d1396b24671c2adaa64d85875e

--- End code ---

Instructions sent from Keysight:
Please find the beta file and checksum attached.

The instruction can be found from the firmware page.

https://www.keysight.com/us/en/lib/software-detail/computer-software/el30000-series-bench-electronic-loads-firmware.html

Download and install the firmware utility
Connect the instrument to the PC
Load the firmware file with the utility tool and perform the firmware upgrade


Note: Please note that I am simply passing on this firmware received and anyone attempting to flash their device is doing so at their own risk.
dkonigs:
As I just got one of these electronic loads myself, I'm curious what the current state of the firmware is...

My unit shipped with the following version:
1.2.5-1.0.6-17-114
The website shows this as the latest version, with a release date of 2022-01-04.

(the previous release is 1.2.3-1.0.6-17-114, listed with a release date of 2021-03-16)

The beta image file shared by the previous post shows a first number that is so far ahead of what I see officially, that I can't help but assume its special numbering for beta releases. So I'm not sure if its actually older or newer than what I have.

So in any case, I guess I'm just wondering whether a new release is around the corner, and what the current state of things is past what's been discussed so far.
bsodmike:
I've just pinged the Keysight team on your behalf.  Unfortunately I didn't have time to test the beta, although I've used the electronic load in a basic manner.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod