EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: elestronico on November 22, 2024, 12:23:19 pm

Title: EMC Partner Transient 2000 ERROR ERR5L33E
Post by: elestronico on November 22, 2024, 12:23:19 pm

Hello everyone,

First of all, thank you and congratulations for a such a beautiful and productive website.

I´m having an issue with the Surge generator module on my Transient 2000.

The message displayed is as follows:

Generator malfunction
==============
High-Voltage overshoot

According to the manual, this error is issued as ERR5L33E.


Any help would be much apricated.

Elestronico.

Title: Re: EMC Partner Transient 2000 ERROR ERR5L33E
Post by: Harry_22 on November 24, 2024, 08:46:39 am

Hi!

First of all we should exactly understand what is the meaning of "overshoot".
There are only one overshoot is mentioned in the manual. No any "undershoot" but only "no high-voltage".
Is undershoot also considered here as an overshoot?

I'm inclined to believe that the more common fault may be a high-voltage undershoot.
In any case begin from an internal inspection. High voltage usually leaves traces...

PS
Have you controlled the surge waveform?