Author Topic: EMC Partner Transient 2000 ERROR ERR5L33E  (Read 267 times)

0 Members and 1 Guest are viewing this topic.

Offline elestronicoTopic starter

  • Newbie
  • Posts: 1
  • Country: es
EMC Partner Transient 2000 ERROR ERR5L33E
« on: November 22, 2024, 12:23:19 pm »
Hello everyone,

First of all, thank you and congratulations for a such a beautiful and productive website.

I´m having an issue with the Surge generator module on my Transient 2000.

The message displayed is as follows:

Generator malfunction
==============
High-Voltage overshoot

According to the manual, this error is issued as ERR5L33E.


Any help would be much apricated.

Elestronico.

 

Offline Harry_22

  • Frequent Contributor
  • **
  • Posts: 603
  • Country: 00
Re: EMC Partner Transient 2000 ERROR ERR5L33E
« Reply #1 on: November 24, 2024, 08:46:39 am »
Hi!

First of all we should exactly understand what is the meaning of "overshoot".
There are only one overshoot is mentioned in the manual. No any "undershoot" but only "no high-voltage".
Is undershoot also considered here as an overshoot?

I'm inclined to believe that the more common fault may be a high-voltage undershoot.
In any case begin from an internal inspection. High voltage usually leaves traces...

PS
Have you controlled the surge waveform?
« Last Edit: November 24, 2024, 01:43:05 pm by Harry_22 »
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf