Enabling options for R&S test equipment

[carver]

there are no such programs for FSL3.
you can contact anyone, who takes them from the R&S site,
but can sell  much cheaper. for example to me.
I work with FSL3/FSL6 before.

[Ksi]

I have updated the firmware from 5.0 to 14.0 in my FSH3, but now it won't boot anymore. Can someone share me older versions from v5 and the like?  Or come up with tips how I can get my instrument working again?

[KaneTW]

What's the current state of option unlock hacks for the RT* series? (RTO2000 etc.)

[dr3hl3rt]

I have a CBT bluetooth tester, and would really like the BLE option (K57)
any ideas?

[LazyJack]

I have a CMU200 and I'm trying to get the K14 (Stereo FM) option working. Now here is the interesting thing. There is nothing in the SWOPT.DAT file. Loads of options are enabled by default, related to mobile phone testing. There are a few that are not enabled, and K14 is nowhere to seen.
 I can use the key generator to generate keys, which are accepted, get written into the SWOPT.DAT file, but does not enable the option. Even if I edit the file, the option will not appear. I don't care about the various cell phone testing options, but I'd really like to get the stereo fm modulation working. Is it possible that some units have hard-code options and SWOPT.DAT is ignored? It is a 1100.0008.10 unit, if that matters.

[tv84]

Are you looking at the correct file?

[LazyJack]

Yes. Definitely. If I enter an option from the setup menu, the code is accepted and it appears in the file. But the option is never enabled. Even if I clear the content of the file, the list of enabled options doesn't change. A number of options, like stereo fm or time based demo don't even appear on the list.
That is why I wonder if some units may have some kind of hardcoded option list based on the hw config. I even tried with a disk image from an other unit and it behaves the same. So it is not a softwer configuration question.

[tv84]

I think there's some info on this thread (or the forum) where the EEPROM where the lics are stored is write-protected. So you have to disable the protection.

I think I didn't dream this...

[Ksi]

Hello friends!

I have an FSH3 and would like help to box up the K3, Receiver. Can someone help me with the code?

serial number 100652

[salomonander]

As someone has asked previously: is there such a keygen for the RTB scopes?

[sergeyklenov]

Possible but need read eeprom with jtag

[salomonander]

In case there is anyone with an RTB willing to do this: you would be my personal hero 🤩

[tv84]

In case there is anyone with an RTB willing to do this: you would be my personal hero 🤩

It has to be done on yours. 

[salomonander]

Judging from my question - considering what i just learned - i guess im not qualified to do so 🤣 thx

Edit: seems like nobody had success on the RTB scopes. Darn.

[MorzeCBP]

Hello friends!

I have an FSH3 and would like help to box up the K3, Receiver. Can someone help me with the code?

serial number 100652

2963101246 Demo Mode
1551245422 DTF B1
0455019671 Vector Calibration K2
0222793566 Remote Control K1
3059944510 Receiver Measurement K3
4013401352 Restricted Acc K60
3069895097 Calibration Allowed K15

[Ksi]

Thank you so much, you are gold 🙏

[radiomechanic]

Hello, friends!

Today, after flashing FSH6 to version 14, I noticed that the screen refresh is slower than before. Keep this in mind when updating.

[ve7xen]

Hey folks, I wanted to play around with running 'desktop apps' on the web with egui + Rust + wasm. Long story short I made a keygen app, It should work for the CMU200 and related units, and the FSxx units. I included all the known seeds for the FSxx units, but I don't know how validity / description maps to different models. Descriptions are just from the original Post #7 code. If anyone has model-specific lists etc. I can incorporate that. Feedback is welcome.

https://rohde.nonexistent.ca/

[cgroen]

Am I right in assuming that none of this will work for a SMU200A ?

[tv84]

Am I right in assuming that none of this will work for a SMU200A ?

Right on.

[cgroen]

Thanks 
Had a feeling that was indeed the case.

[LazyJack]

It seems like that the 1100.0008.10 model (called 'high end service tester') of the CMU200 has a fixed set of options, based on what hardware is installed and no other options can be enabled. Now it would be interesting to find out where it stores the model number and see how it can be changed. It needs to be changed to 1100.0008.02 'universal radiocommunications tester'.

[dr3hl3rt]

Anyone had luck with the CMW500?

[MorzeCBP]

Hello, friends!

I have an old FSH6, I want to improve it. I need keys for options. I spent 2 days with the key generator program, but I still don't understand how to run it. Can you help with the keys?

Держи:
3764584245 Demo Mode
3087642571 DTF B1
1944932055 Vector Calibration K2
2480215784 Remote Control K1
4021211727 Receiver Measurement K3
3323216289 Restricted Acc K60
0027545025 Calibration Allowed K15

[romal76]

is there a way to activate options in SMW200A ?