EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: calibrationfixture on May 21, 2023, 06:22:07 am

Title: Enabling Options on Tektronix DPO7000C, DPO/DSA70000B/C and TDS5000B Series
Post by: calibrationfixture on May 21, 2023, 06:22:07 am

Hi,

Has anybody succeeded in this? With the DPO7000 and DPO/DSA70000 Series this is no problem. But with the B and C's you didn't get the right Scope Type using validate.py. The same seems the case with the TDS5000B Series. In addition with many TDS5000B Keys you get a CRC Mismatch.

Greetings,

Calibrationfixture