| Products > Test Equipment |
| Equipping my first home lab. I kindly ask for your help with suggestions |
| (1/4) > >> |
| TheKid:
I am a seasoned professional who works with low-level firmware and some hardware debugging. I am looking to build my own lab at home and my budget for lab equipment is $2500USD. Trying to get the best bang for the buck equipment. I have done some research but there are so many options out there and it's hard to tell which buys are good with my limited budget. I will be taking on fairly complex projects for an individual and am familiar with using all sorts of testing equipment professionally. For the PSU I definitely do need 3 channels so far I have specced out these two 1. Siglent SPD3303X-E 2. Rigol DP832 I prefer the Rigol because for me the 3rd channel is essential and it seems with rigol all 3 can be programmed. Siglent's 3rd channel is fixed. For the DC Load I'm split between 1. Rigol DL3021 2. Siglent 1T8511A+ I also need an Oscilloscope with minimum requirements of 4 channels 100Mhz and 1GSa/s. I was thinking about Rigol MSO5104 ~$1300. I can't find anything that is comparable to this. I am interested in hacks that increase functionality without hampering its use. I don't know what hacks are still viable. Also, I am genuinely thinking of just getting something cheaper, like say in the $500s range while keeping up with mentioned requirements and just buy a Saelee Logic Pro 8 that is ~1k. I have not really used the Digital functions of the oscilloscope at work(please change my mind). I use a Saelee for I2c, UART etc. It has a good search function too. My tentative budget allocation is like this. PSU+ Load + Ocsilo/with digital functions(or saelee) $400+$500+$1500 I will mostly deal with digital electronics and circuit board design for battery-operated devices. I foresee possibly doing some kind of power use analysis on the hardware I design but that is the most I will be needing in terms of special functions. I am open to other brands but I find that Rigol and Siglent have the best bang for the buck. I don't mind used items but the hassle that comes with it is just not worth it unless there is a local pickup which I have not been able to find good ones in Atlanta. |
| nctnico:
Look at the GW Instek GPP-4343. Neither of the power supplies you are listing are very good in terms of useability. On top of that the GPP-4343 can also act as a load. GW Instek GDS1054B or MicSig TO1000 series are also nice oscilloscopes for a low price. |
| bateau020:
If you are focusing on battery operated devices, a low cost power analyzer like the Joulescope or zs-2102-a might be interesting. For power drain profiling, you may want more resolution than your average scope can give you. For a low cost scope: stay away from the Rigol 1054Z, as the protocol decoding is flawed (only based on on-screen frame, not in-memory). Siglent SDS1104X-E is better in that respect, and hackable to 200MHz. I also found a low voltage differential probe to be invaluable, as scope's MATH functions have always disappointed me. |
| Fungus:
--- Quote from: TheKid on July 03, 2022, 11:58:20 pm ---I also need an Oscilloscope with minimum requirements of 4 channels 100Mhz and 1GSa/s. I was thinking about Rigol MSO5104 ~$1300. I can't find anything that is comparable to this. --- End quote --- You can get the MSO5074 for $1000 and unlock the extra bandwidth, it's easy (and reversible). https://www.eevblog.com/forum/testgear/hacking-the-rigol-mso5000-series-oscilloscopes/ |
| tautech:
--- Quote from: TheKid on July 03, 2022, 11:58:20 pm ---I am a seasoned professional who works with low-level firmware and some hardware debugging. I am looking to build my own lab at home and my budget for lab equipment is $2500USD. --- End quote --- Welcome to the forum. SPD3303X-E $ 399 SDL1020X-E $ 499 SDS2104X Plus $ 1399 Total spend $ 2,297 ^ three popular sellers for us. :) PS, all 3 can be enhanced. ;) |
| Navigation |
| Message Index |
| Next page |