Author Topic: ESI engineering bulletin no.24 (Calibration of a KV divider)  (Read 1085 times)

0 Members and 1 Guest are viewing this topic.

Offline lowimpedance

  • Super Contributor
  • ***
  • Posts: 1181
  • Country: au
  • Watts in an ohm?
ESI engineering bulletin no.24 (Calibration of a KV divider)
« on: October 12, 2015, 11:21:41 pm »
 Seeing the recent ESI KV dekapot 'internal photo' post, prompted me to finally scan these OLD ESI egineering bulletins I had, for the reference of all you metrologists out there. (not sure if these allready exist somewhere else, a quick search gave no results as such)
here they are ;

The odd multimeter or 2 or 3 or 4...or........can't remember !.
 

Online Vgkid

  • Super Contributor
  • ***
  • Posts: 2633
  • Country: us
Re: ESI engineering bulletin no.24 (Calibration of a KV divider)
« Reply #1 on: October 12, 2015, 11:53:56 pm »
Thanks for uploading those, I will download those to my computer later. Read them on my phone.
If you own any North Hills Electronics gear, message me. L&N Fan
 

Offline crispy_tofu

  • Super Contributor
  • ***
  • Posts: 1124
  • Country: au
Re: ESI engineering bulletin no.24 (Calibration of a KV divider)
« Reply #2 on: October 13, 2015, 01:27:34 am »
Although I probably won't know what it means, it's still great to have. Thank you!!  ;D
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf