| Products > Test Equipment |
| ET5410 or DCL6104 or a third programmable electronic DC Load in the budget cat.? |
| << < (5/5) |
| Hydron:
Sorry I only have a single channel version (DCL6104A, 500V 15A version) - can't help there! Does anyone have a firmware file for one of these units? Could help a lot with figuring out SCPI. Didn't see any downloads on their site unfortunately. |
| DaneLaw:
Took the plunge on Easter Tester ET5410 as it seems to be filled with quite extensive testing features, and even some that I don't even know the use-cases for. - plus it was stocked inside Europe (CN wholesalers /BG), so only 2 or 3 days shipping time The SW&HW it arrived with. v1.02.21.27.002 / v1.03.21.36.003 --- End quote --- --- End quote --- --- End quote --- The screen looks clear & vibrant, but the resolution ain't bad for a 2.8" with 400x280. --- End quote --- At first glance, I'm quite impressed (with the price in mind) as things are weirdly expensive here in Denmark, to an extent that DK sadly top the continent by a margin, which also leaves quite a mark on the second-hand market and test-gear prices there. A 40A / 420W programable electronic load with incl. 25% danish VAT delivered to your door for 144 USD, is miles better than what I could find regional. The small postcard with date-of-manufacturer claims 1/2022, but these QC greeting cards usually don't carry any meaning. though will try to open it up and see if anything varies like board rev. etc., but I doubt it.. SW & FW could indicate the first half of 2021 (SW=02.21 / HW=03.21?) Quite beefy 4mm banana jacks at 7mm wide... the knob was added. // The production date in the start of 2022.. is likely correct as there are components inside with date codes in late 2021. Been taking a look at Dingchen DCL6104. as far as I can tell, these more advanced features.. are not present on the 6000 series.. and are first being explained on the 8000 and 9000 series. DCL8000 http://www.czdingchen.com/Uploads/file/20180322/1521706906227564.pdf DCL6000 http://www.czdingchen.com/Uploads/file/20180511/1526017647119833.pdf Manuals, SW & SCPI etc http://www.czdingchen.com/custom/2 |
| burkm:
Hard to tell, because all docs and info is in Chinese... |
| Navigation |
| Message Index |
| Previous page |