Products > Test Equipment

ET5410 or DCL6104 or a third programmable electronic DC Load in the budget cat.?

<< < (5/5)

Hydron:
Sorry I only have a single channel version (DCL6104A, 500V 15A version) - can't help there!

Does anyone have a firmware file for one of these units? Could help a lot with figuring out SCPI. Didn't see any downloads on their site unfortunately.

DaneLaw:
Took the plunge on Easter Tester ET5410 as it seems to be filled with quite extensive testing features, and even some that I don't even know the use-cases for.
- plus it was stocked inside Europe (CN wholesalers /BG), so only 2 or 3 days shipping time

The SW&HW it arrived with.  v1.02.21.27.002 / v1.03.21.36.003

--- End quote ---



--- End quote ---



--- End quote ---


The screen looks clear & vibrant, but the resolution ain't bad for a 2.8" with 400x280.

--- End quote ---


At first glance, I'm quite impressed (with the price in mind) as things are weirdly expensive here in Denmark, to an extent that DK sadly top the continent by a margin, which also leaves quite a mark on the second-hand market and test-gear prices there.
A 40A / 420W programable electronic load with incl. 25% danish VAT delivered to your door for 144 USD, is miles better than what I could find regional.

The small postcard with date-of-manufacturer claims 1/2022, but these QC greeting cards usually don't carry any meaning. though will try to open it up and see if anything varies like board rev. etc., but I doubt it.. SW & FW could indicate the first half of 2021 (SW=02.21 / HW=03.21?)
Quite beefy 4mm banana jacks at 7mm wide... the knob was added.
// The production date in the start of 2022.. is likely correct as there are components inside with date codes in late 2021.

Been taking a look at Dingchen DCL6104.
as far as I can tell, these more advanced features.. are not present on the 6000 series.. and are first being explained on the 8000 and 9000 series.

DCL8000 http://www.czdingchen.com/Uploads/file/20180322/1521706906227564.pdf
DCL6000 http://www.czdingchen.com/Uploads/file/20180511/1526017647119833.pdf
Manuals, SW & SCPI etc http://www.czdingchen.com/custom/2

burkm:
Hard to tell, because all docs and info is in Chinese...

Navigation

[0] Message Index

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod