EEVblog® Electronics Community Forum

Products => Test Equipment => Topic started by: Rhys on May 29, 2016, 10:51:59 am

Title: Feeltech function generator
Post by: Rhys on May 29, 2016, 10:51:59 am

Hi just got a feeltech generator model FY2200 REV 3.0 which goes to 2 MHZ.I have found by pressing the menu button and switching it on at the same time it extends the output frequency to 20MHZ.Just thought it may be of intrest to any one that has one.Rhys

Title: Re: Feeltech function generator
Post by: JoeO on May 29, 2016, 11:40:53 am

Link?

Title: Re: Feeltech function generator
Post by: xrunner on May 29, 2016, 12:22:10 pm

Quote from: Rhys on May 29, 2016, 10:51:59 am

Hi just got a feeltech generator model FY2200 REV 3.0 which goes to 2 MHZ.I have found by pressing the menu button and switching it on at the same time it extends the output frequency to 20MHZ.Just thought it may be of intrest to any one that has one.Rhys

Is it this thing?

Feeltech 2200 (http://www.ebay.com/itm/FY2200S-DDS-NC-dual-channel-function-signal-generator-0-6MHZ-/141887838556?hash=item21092c995c:g:-nMAAOSwr7ZW7qSo)

(http://i.ebayimg.com/images/g/-nMAAOSwr7ZW7qSo/s-l1600.jpg)

There are quite a few models that all look the same but have different max freq. specs but have no labelling to that effect on the front panel. Looks like you found a trick around that.

Title: Re: Feeltech function generator
Post by: Rhys on May 29, 2016, 01:20:18 pm

Hi yes thats the one underneath says FY2200 2MHZ.