Products > Test Equipment
FeelTech FY6600 60MHz 2-Ch VCO Function Arbitrary Waveform Signal Generator
yo0:
--- Quote from: DaveR on October 16, 2018, 12:47:11 am ---Hi Pio,
The KKMoon and Feeltech versions are the same product, except for the badge on the front. The mainboard is marked 'Feeltech' in both units. Firmware in both models on sale is probably still at 1.6 at the moment, but the latest models from the factory may already be at 1.7. Updating from 1.6 to 1.7 is quick and simple - the KKMoon model connects to the Feeltech server and the update process is automatic once you start it via the control software.
Regards,
Dave
--- End quote ---
thank you, what if the unit comes with 1.5 version? do you think it is upgradable?
best regards.
Pio
DaveR:
--- Quote from: yo0 on October 29, 2018, 02:38:02 am ---
thank you, what if the unit comes with 1.5 version? do you think it is upgradable?
--- End quote ---
Have you actually got one with v1.5? I thought the first versions on sale started at 1.6, but as the FY6800 was designed to be upgradeable, v1.5 (if there are any) should be as well. Soundtec had one of the very first 6800s from the factory and his has been updated ok, from whichever firmware version it started with.
yo0:
--- Quote from: DaveR on November 01, 2018, 09:26:04 pm ---
--- Quote from: yo0 on October 29, 2018, 02:38:02 am ---
thank you, what if the unit comes with 1.5 version? do you think it is upgradable?
--- End quote ---
Have you actually got one with v1.5? I thought the first versions on sale started at 1.6, but as the FY6800 was designed to be upgradeable, v1.5 (if there are any) should be as well. Soundtec had one of the very first 6800s from the factory and his has been updated ok, from whichever firmware version it started with.
--- End quote ---
No, i ask about 1.5 version because ebay advertising shows screens with v1.5. In many fy6800 offerings.
Example:
https://www.ebay.com/itm/FY6800-60MHz-Precision-Digital-DDS-Dual-channel-Function-Signal-Generator-M2K6/302793047829?epid=10008503115&hash=item467fdf3f15:g:nf4AAOSwbb9bPE3l
Best regards.
Pio
josh bowman:
2 questions about the FY6600, I'm sure it's somewhere buried in this forum, but I can't find it.
When you select Mod button and choose FM modulation, what is Bias??
Is there any way to change the default voltage to something lower than 5 volts?
DaveR:
Hi Pio - those screenshots are probably just taken from an early model as the 6800 went into production, and still used as examples for advertising on ebay etc.. I doubt very much whether you'll get anything other than v1.6 or 1.7 if you buy one now.
Regards,
Dave
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version