EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: pascal_sweden on July 26, 2020, 01:07:42 pm

Title: FeelTech FY6900 (250 MSa/s 14-bits) versus JunTek JDS6600 (200 MSa/s 12-bits)
Post by: pascal_sweden on July 26, 2020, 01:07:42 pm

The FeelTech FY6900 seems to be the better choice of both options!

Or are there specific reasons why one would lean towards the JunTek JDS6600 instead (besides a lower price)?

FeelTech FY6900:
https://www.aliexpress.com/item/4000012709976.html (https://www.aliexpress.com/item/4000012709976.html)

JunTek JDS6600:
https://www.aliexpress.com/item/32867548193.html (https://www.aliexpress.com/item/32867548193.html)

Title: Re: FeelTech FY6900 (250 MSa/s 14-bits) versus JunTek JDS6600 (200 MSa/s 12-bits)
Post by: pascal_sweden on July 29, 2020, 02:35:42 pm

Anybody who has both devices?

Title: Re: FeelTech FY6900 (250 MSa/s 14-bits) versus JunTek JDS6600 (200 MSa/s 12-bits)
Post by: Adrian_Arg. on July 29, 2020, 03:08:28 pm

I had a FY6900 60Mhz, which sold it and bought a FY6900 20Mhz, it is not worth spending on a 60Mhz, it is for hobby these like the jds6600, if it is for serious work I would personally go for rigol, siglent. The fy6900 Mhz works for me because I use it for hobby in electronics and arduino.

in spanish
yo tuve un FY6900 60Mhz, el cual lo vendi y compre un FY6900 20Mhz, no vale la pena gastar en un 60Mhz, es para hobby estos como  el jds6600, si es para trabajo serio yo personalmente iria por rigol, siglent. A mi me sirve el fy6900 Mhz porque lo uso para hobby en electronica y arduino.