| Products > Test Equipment |
| REVIEW - Rigol DS2072 - First Impressions of the DS2000 series from Rigol |
| << < (211/566) > >> |
| Jean:
--- Quote from: XaS on June 05, 2013, 07:21:24 am ---Hi guys! A quick question, I hope I didn't miss it being already covered in the last 78 (!!! :-+) pages. Having used my scope several times now, I still can't get how to enable or disable measurements from the left-side meu. I find it very hard to see the logic of that. Sometimes new measurements appear on the right side, sometimes it shifts the older measurements and appears somewhere between the already activated ones. Is there any way that Rigol will change that very annoiing behaviour any time soon?Thank god they listened to us about the inverted X-Y mode... XaS --- End quote --- Hi XaS, To disable them, use "Measure" button, then choose "Clear" menu, you can now delete any of the 5 items (measures), you can also disable all of them by pressing "All items". It's possible to "undo" everything by choosing "Recover". Hope it helps :) |
| ct:
I start following this topic after I watched Marmad's review of the Rigol 2072 oscilloscope. ...And here is another new owner of the Rigol 2072. I'm a beginner in electronics, with some ties in the past, but I'm very excited to have just bought a tool I can use to see what's going on inside my or others' electronic circuits. And what a tool it is! Also, it's good to see experienced users exploring the features and sharing information about this oscilloscope. For us, beginners, it's priceless. Thanks. OK, too much excitement here. I'm going back to work now, but I can't wait to use the oscilloscope again. |
| marmad:
--- Quote from: XaS on June 05, 2013, 07:21:24 am ---Having used my scope several times now, I still can't get how to enable or disable measurements from the left-side meu. I find it very hard to see the logic of that. Sometimes new measurements appear on the right side, sometimes it shifts the older measurements and appears somewhere between the already activated ones. --- End quote --- @Xas: I can't say that I've seen that behavior. When I add a measurement, it always appears in the first 'open' position (of five positions) farthest right - or if all positions are filled (i.e. 5 measurements already on screen), all of them move one position to the left (the farthest left disappears), and the new one again appears farthest right. For deleting them, as Jean mentioned, you have many options under the 'Measure' menu. |
| XaS:
Hi Jean Thanks for your tip. I always use the clear all method. Sadly that doesn't solve my problem. To clarify what I mean: - Select Period Measurement on CH1 and after that the same on CH2. You got now: | Period CH1 | Period CH2 | empty | empty | empty | - Now clear all measurements, you get: | empty | empty | empty | empty | empty | - Now select Period Measurement on CH2. You get: | Period CH2 | empty | empty | empty | empty | - Select Period Measurement on CH1. I would like it to appear on the right of Period Measurement CH2, like this: | Period CH2 | Period CH1 | empty | empty | empty | Instead I get the same as after the first step. I see no way to sort the measurements the way I like besides fill all measurement slots with garbage, delete them and then fill them in the right order. XaS Edit: Sorry marmad, I didn't see your post before I saved mine. The problem is in re-activating a measurement which is still in a recovery-slot. In my opinion, this recover option messes up the order. No big deal but sometimes annoying to me. |
| marmad:
--- Quote from: XaS on June 05, 2013, 12:15:29 pm ---- Select Period Measurement on CH1. I would like it to appear on the right of Period Measurement CH2, like this: | Period CH2 | Period CH1 | empty | empty | empty | Instead I get the same as after the first step. I see no way to sort the measurements the way I like besides fill all measurement slots with garbage, delete them and then fill them in the right order. --- End quote --- Hmm... I get exactly what you would like to get (as shown above) - I don't get the same as after the first step ??? For me, the Recover options don't seem to have any effect if I've used 'All Items' -> 'Delete'. |
| Navigation |
| Message Index |
| Next page |
| Previous page |