| Products > Test Equipment |
| REVIEW - Rigol DS2072 - First Impressions of the DS2000 series from Rigol |
| << < (213/566) > >> |
| orbiter:
--- Quote from: XaS on June 05, 2013, 12:41:31 pm ---marmad and orbiter, thanks for checking with your units. I still run v00.00.01.00.05, maybe this is fixed in the most recent software version? XaS --- End quote --- Same here marmad.. FW v.01.00.00.03 @XaS.. The latest FW does indeed sort out a few issues on the scope, as shown on page one of this thread via marmads excellent compilation of info. https://www.eevblog.com/forum/testgear/first-impressions-and-review-of-the-rigol-ds2072-ds2000-series-dso/msg158684/#msg158684 |
| marmad:
--- Quote from: orbiter on June 05, 2013, 12:51:31 pm ---@XaS.. The latest FW does indeed sort out a few issues on the scope, as shown on page one of this thread via marmads excellent compilation of info. https://www.eevblog.com/forum/testgear/first-impressions-and-review-of-the-rigol-ds2072-ds2000-series-dso/msg158684/#msg158684 --- End quote --- Although the latest firmware also adds one NEW measurement bug (#13) which you will have to workaround until the next release. But really, v.01.00.00.03 fixes so many bugs and annoyances (especially the way that the DSO didn't update the display quickly enough in earlier versions) - it's definitely worth the upgrade (even with the new bug). |
| XaS:
Thank you all for checking, it seems to be solved in 01.00.00.03 indeed. I couldn't find this particular problem in the first post, that's why I asked here. It seems like this wasn't discovered so far. @marmad: Yes, #13 is a bummer. But as far as I know it is also possible to downgrade if it gets too annoying, right? Also, if you could check your email if you've got a minute to spare... ;) XaS |
| marmad:
--- Quote from: XaS on June 05, 2013, 01:03:35 pm ---Thank you all for checking, it seems to be solved in 01.00.00.03 indeed. I couldn't find this particular problem in the first post, that's why I asked here. It seems like this wasn't discovered so far. @marmad: Yes, #13 is a bummer. But as far as I know it is also possible to downgrade if it gets too annoying, right? Also, if you could check your email if you've got a minute to spare... ;) XaS --- End quote --- Yes, you can downgrade - and I've sent you email ;) But make sure you do upgrading/downgrading via the bootloader, as described in that same post. |
| XaS:
With 00.01.00.00.03, the measurement section reacts now as I wanted it to. Thanks all you guys! :-+ By the way, I just wanted to install a new, more silent fan. Lifting the sticker was no problem at all, but inside, on the screws holdung the metal case, there is a nasty, thin red film of colour. Any scratches will be obvious. Now I've got to wait for 33 months untill I get a silent DSO... :'( XaS |
| Navigation |
| Message Index |
| Next page |
| Previous page |