Products > Test Equipment
REVIEW - Rigol DS2072 - First Impressions of the DS2000 series from Rigol
marmad:
--- Quote from: g2 on July 02, 2013, 08:50:02 am ---Hello
There is a new firmware to Rigol DS2000:
DS2000(DSP)update_00.01.01.00.02.
--- End quote ---
Thanks, g2!
The bug fixes/changes from new FW#01.01.00.02 are listed as folllows:
1. Optimized the .csv file accuracy in DC coupling.
2. Fixed the Uart decoding error when baud rate is 10400.
3. Fixed the crash when math advanced is “CH1==CH2”.
4. Fixed storage and recall waveform error in ROLL mode
5. Fixed trigger delay in 500uV/div
6. Added file name when printing screen
7. Fixed measure error when delete some measure items
8. Fixed trial license lost when do self-calibration
9. Optimized source setting for DS2000-S series
darrylp:
--- Quote from: EV on July 01, 2013, 07:51:43 pm ---
--- Quote from: Wim13 on July 01, 2013, 07:07:35 pm ---See picture with a rise time of 1.5 nSec that is 350/1.5 is 233 Mhz,
what is also measured with a signal generator
--- End quote ---
It is even better. Look at the picture, there rise time is 1.32 ns which gives BW = 350 / 1.32 = 265 MHz.
--- End quote ---
That's hardly 10% to 90% rise time, more like 15% to 85% which will show a much shorter time and thus calculated bandwidth.
--
Darryl
marmad:
Updated the bug list (download links for FW at the bottom of that post):
Struck out bugs #6, #12, and #13 which appear to have been fixed.
Anti-aliasing still does NOT anti-alias.
I haven't tested the RS-232 decoding issue yet. If someone else finds that it's been updated, let me know.
On another note, I love that Rigol continues the confusing reverse downward notation of the final version number digit - hopefully next version will end with .01 or .00 ;D
EV:
--- Quote from: darrylp on July 02, 2013, 10:27:41 am ---That's hardly 10% to 90% rise time, more like 15% to 85% which will show a much shorter time and thus calculated bandwidth.
--
Darryl
--- End quote ---
Are you telling that Rigol calculates the rise time in wrong way?
EV:
--- Quote from: marmad on July 02, 2013, 10:06:39 am ---The bug fixes/changes from new FW#01.01.00.02 are listed as folllows:
--- End quote ---
Looks good, there are not many bugs anymore. I hope there are no new bugs! :) :-+
I am not at home now, so I can not test it.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version