Products > Test Equipment
REVIEW - Rigol DS2072 - First Impressions of the DS2000 series from Rigol
<< < (270/566) > >>
gierig:
Big thanks to marmad :-+.

good work on the Updates and infos & Tables and Stuff.

got my DS2102 since few days and for bug hunting and "hey support give me the Updates that i need"
that info was this very helpfuel  (i upgrade just from 60 Year old HP 140A  - 20MHZ )

Just upgrade to 01.01.00.02 and that solve the the bug above #3, #6, very Importet #13 for me.
Nice thing also i got still the 2202 Bandwidth settings as i use the nice DSA9 thing.



EV:

--- Quote from: gierig on July 02, 2013, 05:55:53 pm ---Big thanks to marmad :-+.

--- End quote ---

Wellcome to the forum! Have you already found this thread?
https://www.eevblog.com/forum/projects/software-tips-and-tricks-for-rigol-ds200040006000-ultravision-dsos/
gierig:

--- Quote from: EV on July 02, 2013, 06:17:26 pm ---
Wellcome to the forum! Have you already found this thread?
https://www.eevblog.com/forum/projects/software-tips-and-tricks-for-rigol-ds200040006000-ultravision-dsos/

--- End quote ---

Thanks.
Yes, that the what i meaning with the Stuff  above. :-)
I use it to take Pictures more then to record, but i don't found any other tool with nearly this functions...


orbiter:

--- Quote from: Wim13 on July 02, 2013, 03:45:07 pm ---It is in TRIGGER mode, you tested the AC-DC input, Teneyes mentioned the TRIGGER mode AC/DC

--- End quote ---

Wim13.. I removed my scope capture images to avoid confusion on the thread. My results were indeed in the trigger mode AC/DC, although
apparently this 'bug' does not show up at the frequencies I was testing at (below 20MHz.)
poida_pie:
Hi all, just a FYI on the current situation for DS2072 stock here in AUS.
I bought maybe the last DS2072 from Emona yesterday, it arrived today.
I can't fault Emona for service, I would suggest anyone here gives them a go.
They say there is new stock arriving in two weeks.
My model shows:
f/w 00.01.00.00.03
h/w 1.0.1.0.0
with the trails installed as usual.

I would like to say THANK YOU to Marmad for his work in bringing to life a great community of users of this great instrument.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod