Products > Test Equipment
REVIEW - Rigol DS2072 - First Impressions of the DS2000 series from Rigol
<< < (326/566) > >>
leafi:
Does anyone else's DS2702 have a low frequency buzzing sound coming from the power supply area? It sounds like my transformer is buzzing. I am not looking forward to RMA'ing the scope I just got today.

bronson:
Unfortunately no. Other than the overeager fan, this thing is pretty much silent.
up8051:

--- Quote ---Serial: DS2A15270XXXX
Software version: 00.01.01.00.02 (latest I believe?)
Hardware version: 1.0.1.0.0
DS2A1527xxxxx (Week 27, 2013) -> RP3300A

Serial: DS2A1527XXXXX
Software version: 00.01.01
Hardware version: 2.0
DS2A1520xxxxx (Week 20, 2013) -> RP3300

--- End quote ---

Hi All,

My DS2072 I got yesterday came with the switchable RP3300 probes.

Serial: DS2A1509XXXXXX ( (Week 9, 2013 ?)
Software version: 00.00.01
Hardware version: 1.0
Probes ->  RP3300
No information about FPGA version

Is the latest firmware?
Why version numbers are in short form?

Best regards,
up8051
Carrington:

--- Quote from: up8051 on August 01, 2013, 10:48:39 am ---
--- Quote ---I've noticed that with the series DS2A1527XXXXX RIGOL not only changed the probes.

UberSteve: https://www.eevblog.com/forum/testgear/first-impressions-and-review-of-the-rigol-ds2072-ds2000-series-dso/msg263616/#msg263616
Serial: DS2A15270XXXX
Software version: 00.01.01.00.02 (latest I believe?)
Hardware version: 1.0.1.0.0

Leonard Tatzig: https://www.eevblog.com/forum/testgear/sniffing-the-rigol%27s-internal-i2c-bus/msg269946/#msg269946
Serial: DS2A1527XXXXX
Software version: 00.01.01
Hardware version: 2.0

Carrington: https://www.eevblog.com/forum/testgear/first-impressions-and-review-of-the-rigol-ds2072-ds2000-series-dso/msg264041/#msg264041
DS2A1520xxxxx (Week 20, 2013) -> RP3300
DS2A1527xxxxx (Week 27, 2013) -> RP3300A


--- End quote ---
Hi All,

My DS2072 I got yesterday came with the switchable RP3300 probes.

Serial: DS2A1509XXXXXX ( (Week 9, 2013 ?)
Software version: 00.00.01
Hardware version: 1.0
Probes ->  RP3300
No information about FPGA version

Is the latest firmware?
Why version numbers are in short form?

Best regards,
up8051

--- End quote ---

https://www.eevblog.com/forum/testgear/first-impressions-and-review-of-the-rigol-ds2072-ds2000-series-dso/msg158684/#msg158684

To get the full firmware version info from the DSO, follow these instructions:

Go to the Trigger menu and set Edge trigger.
While keeping the Trigger menu open, you are going to use the 6th and 7th right-side menu buttons as follows:
Press the [Menu7][Menu6][Menu7][Utility] buttons one after another quickly.
Then check additional info under System -> System Info.

Please post the result.

Note: I allowed myself to edit your post to clarify.
Cheers.
up8051:
Hi,

Full info:

Serial: DS2A1509XXXXX
Software version: 00.00.01.00.05
Hardware version: 1.0.1.0.0
FPGA version:
 SPU 03.01.05
 WPU 00.06.00
 CCU 12.29.00
 MCU 00.05

RP3300 probes

Best regards,
up8051
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod