Products > Test Equipment

REVIEW - Rigol DS2072 - First Impressions of the DS2000 series from Rigol

<< < (326/566) > >>

leafi:
Does anyone else's DS2702 have a low frequency buzzing sound coming from the power supply area? It sounds like my transformer is buzzing. I am not looking forward to RMA'ing the scope I just got today.

bronson:
Unfortunately no. Other than the overeager fan, this thing is pretty much silent.

up8051:

--- Quote ---Serial: DS2A15270XXXX
Software version: 00.01.01.00.02 (latest I believe?)
Hardware version: 1.0.1.0.0
DS2A1527xxxxx (Week 27, 2013) -> RP3300A

Serial: DS2A1527XXXXX
Software version: 00.01.01
Hardware version: 2.0
DS2A1520xxxxx (Week 20, 2013) -> RP3300

--- End quote ---

Hi All,

My DS2072 I got yesterday came with the switchable RP3300 probes.

Serial: DS2A1509XXXXXX ( (Week 9, 2013 ?)
Software version: 00.00.01
Hardware version: 1.0
Probes ->  RP3300
No information about FPGA version

Is the latest firmware?
Why version numbers are in short form?

Best regards,
up8051

Carrington:

--- Quote from: up8051 on August 01, 2013, 10:48:39 am ---
--- Quote ---I've noticed that with the series DS2A1527XXXXX RIGOL not only changed the probes.

UberSteve: https://www.eevblog.com/forum/testgear/first-impressions-and-review-of-the-rigol-ds2072-ds2000-series-dso/msg263616/#msg263616
Serial: DS2A15270XXXX
Software version: 00.01.01.00.02 (latest I believe?)
Hardware version: 1.0.1.0.0

Leonard Tatzig: https://www.eevblog.com/forum/testgear/sniffing-the-rigol%27s-internal-i2c-bus/msg269946/#msg269946
Serial: DS2A1527XXXXX
Software version: 00.01.01
Hardware version: 2.0

Carrington: https://www.eevblog.com/forum/testgear/first-impressions-and-review-of-the-rigol-ds2072-ds2000-series-dso/msg264041/#msg264041
DS2A1520xxxxx (Week 20, 2013) -> RP3300
DS2A1527xxxxx (Week 27, 2013) -> RP3300A


--- End quote ---
Hi All,

My DS2072 I got yesterday came with the switchable RP3300 probes.

Serial: DS2A1509XXXXXX ( (Week 9, 2013 ?)
Software version: 00.00.01
Hardware version: 1.0
Probes ->  RP3300
No information about FPGA version

Is the latest firmware?
Why version numbers are in short form?

Best regards,
up8051

--- End quote ---

https://www.eevblog.com/forum/testgear/first-impressions-and-review-of-the-rigol-ds2072-ds2000-series-dso/msg158684/#msg158684

To get the full firmware version info from the DSO, follow these instructions:

Go to the Trigger menu and set Edge trigger.
While keeping the Trigger menu open, you are going to use the 6th and 7th right-side menu buttons as follows:
Press the [Menu7][Menu6][Menu7][Utility] buttons one after another quickly.
Then check additional info under System -> System Info.

Please post the result.

Note: I allowed myself to edit your post to clarify.
Cheers.

up8051:
Hi,

Full info:

Serial: DS2A1509XXXXX
Software version: 00.00.01.00.05
Hardware version: 1.0.1.0.0
FPGA version:
 SPU 03.01.05
 WPU 00.06.00
 CCU 12.29.00
 MCU 00.05

RP3300 probes

Best regards,
up8051

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod