Products > Test Equipment
REVIEW - Rigol DS2072 - First Impressions of the DS2000 series from Rigol
<< < (337/566) > >>
Teneyes:

--- Quote from: bronson on September 17, 2013, 07:12:11 pm ---By "no input" do you mean grounded or floating?

--- End quote ---

Floating or 50 Ohm terminations , not much different
most is RF interference + Noise inside
more to show the Display offset after Cali.
Temperature has effect.

after 36 hours
      Chan. 1       20uV  better
and
      Chan. 2   +130uV off

kv3x:
Ordered my DS2072 from Pete at TEquipment.net.  Received the EEVblog discount when I mentioned I heard of them from this place.  Really helpful and prompt order processing and shipment.  Hope to see it Monday or Tuesday next week...  Can't wait to play around with the scope, based on all I have read here.   :D
Sparky:

--- Quote from: Teneyes on September 16, 2013, 08:08:45 pm ---Quiet Thread now, everyone gone to hacksville ;D


--- Quote from: Teneyes on August 07, 2013, 03:14:26 pm ---
--- Quote from: Sparky on August 07, 2013, 02:05:18 am ---Just wanted to post a reminder that this is something to be on the look out for if you hear rattling in your scope!  Obviously not good to have metal pieces loose around in there...

--- End quote ---
Hi Sparky
Sh!t , a rattle in my DS2072, and one retaining clip fell out :--
and another one rattling, I got it near the vent and working on getting that clip out, :--

--- End quote ---

Just an Update
Rigol issued an RMA to me
Rigol also sent me a prepaid shipping Label with tracking
I tracked the shipment to Rigol and 40 hours after it arrived at Rigol (NA) it was shipped back to me.
Fast service for me. .

--- End quote ---

Thanks for update Teneyes -- am glad Rigol fixed this issue for you, with excellent RMA service.  I will probably go through this processes to fix the springs on my unit by the end of the year.
kv3x:
I ordered my DS2072 on September 16 from TEquipment, it shipped on the 17th, and was received on the 23rd.  Great service and prompt shipping!

So, my unit shows the following:

Serial - DS2A1534xxxxxx
S/W version - 00.01.01
H/W version - 2.0

It looks like it was manufactured between August 19 and the 25th.  The RP3300A (10x) probes were included.

Used RiGen version 2b1 on an old XP netbook.  It took only a minute and worked great to unlock all the options.  Thanks to EEVblog for all the info!

Now, for the life of me, I cannot get the extended system info, even before the "upgrade".  I read marmad's instructions on the first page of this thread, but just can't get the right keystroke combination.  Did something change?
kv3x:
With the patient guidance and assistance of Teneyes, I was *finally* able to obtain the extra system information of my DS2072.  I won't admit here, in public, the stupid thing I did along the way.

Here's how it reads:

Model:   DS2202   (after the hack found here)
Serial:  DS2A15340xxxx
Software version:  00.01.01.00.02
Hardware version:  1.0.2.0.0
FPGA version: 
                   SPU  03.01.05
                   WPU  00.06.05
                   CCU  12.29.00
                   MCU  00.05
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod