| Products > Test Equipment |
| REVIEW - Rigol DS2072 - First Impressions of the DS2000 series from Rigol |
| << < (352/566) > >> |
| marmad:
I've updated the High Res bandwidth table to reflect all Memory Depth Settings: Two interesting things to note: 1) The bandwidths are similar down to the 20us/div time base setting - but the effective bits of resolution differs at the 10us/div and 20us/div settings. 2) The bandwidths of the 56M memory depth setting are the same as the 1.4M setting, except at 500us/div, 5ms/div, and 50ms/div - where it instead matches the AUTO/14M setting. |
| Carrington:
CAN-DS2000A CAN trigger and decode for DS2000 and DS2000A. Source: http://www.tequipment.net/RigolPricelist.html |
| marmad:
--- Quote from: Carrington on November 23, 2013, 08:48:14 pm ---CAN-DS2000A CAN trigger and decode for DS2000 and DS2000A. Source: http://www.tequipment.net/RigolPricelist.html --- End quote --- Interesting. I wonder if it really works with all older model DS2000s (HW v.1)? If it does, it must require a firmware upgrade. |
| Carrington:
--- Quote from: marmad on November 23, 2013, 09:00:25 pm ---Interesting. I wonder if it really works with all older model DS2000s (HW v.1)? If it does, it must require a firmware upgrade. --- End quote --- I hope so, because mine is 1.0. :D |
| kosh:
Hi, something strange has happened to my scope. A few days ago the trial options on my DS2072 ran out. So I decided it was time for a firmware upgrade and a calibration, which I was hesitant with until now. So I upgraded from version 00.01.00.00.03 to the latest 00.01.01.00.02 and after that I ran the calibration procedure. I have used the device several times after that and I think I even checked to see if the trial options were still gone, and sure enough they were. Today I power on my scope and I am being greeted with the boot message showing the trial options with over 2000 minutes left again, and yes all the menus that were greyed out before are now accessible again. I am not complaining, but wondering, has this happened to anyone else? |
| Navigation |
| Message Index |
| Next page |
| Previous page |