| Products > Test Equipment |
| REVIEW - Rigol DS2072 - First Impressions of the DS2000 series from Rigol |
| << < (358/566) > >> |
| EV:
Can somebody explain why trace of channel 1 looks very different if channel 2 is on or off? Look at the pictures! |
| Phili76:
Maybe because it's only 1Gsa/s when capturing 2 channels? Philipp |
| EV:
Maybe, I don't know. The over shoot with Rigot is also quite big. It should be under 3 %. Maybe the adaption with 50 Ohm feed through terminator is not very good. |
| EV:
Here is for comparison picture trom TEK TDS3032. Over shoot is 2.1 %. |
| Wim13:
There is always something like cross talk between channels. To the book Rigol claims cross talk between ch1 and 2 better then 40 dB Well on my DSO, at 200 Mhz, crosstalk is about 70dB, See picture, ch2 is closed with only 50 ohm, nothing else. |
| Navigation |
| Message Index |
| Next page |
| Previous page |