Products > Test Equipment
REVIEW - Rigol DS2072 - First Impressions of the DS2000 series from Rigol
<< < (363/566) > >>
marmad:

--- Quote from: Galaxyrise on December 07, 2013, 05:36:09 am ---Ooo, did they fix high res in roll mode? It had the same problem.

--- End quote ---

I just checked - and since I never noticed that before, I'm not sure. It seems OK to me: switching in and out of High Res appears to be the same intensity - but you'd be able to tell better than me (using whatever conditions you used before).

But honestly, I can't imagine often needing that combination of features. When in Roll mode and IF using High Res, your -3 dB bandwidths are approximately the following:

200ms = 343Hz
500ms = 171Hz
1s    = 68.6Hz
2s    = 34.3Hz
5s    = 17.1Hz
10s   = 6.8Hz
20s   = 3.4Hz
50s   = 1.7Hz
100s  = 0.68Hz
200s  = 0.34Hz
500s  = 0.17Hz
1000s = 0.06Hz
Electro Fan:
I'm not sure if this helps sort anything out, but here are 2 images from the DS1000Z and some from the DS2000 showing an attempt at comparing intensity grading.  These were from a BK Precision function generator producing some modulated signals.

EF

(Not sure why the DS2 images open from a browser and the DS1Z don't, but the DS1Z images do seem to open in Microsoft Office Picture Manager.)
marmad:

--- Quote from: Electro Fan on December 07, 2013, 11:06:08 pm ---I'm not sure if this helps sort anything out, but here are 2 images from the DS1000Z and 2 from the DS2000 showing an attempt at comparing intensity grading.

--- End quote ---

I don't know how the DS1000Z functions, but the DS2000 get's a wider range of grades as you turn the intensity down - although many of those grades are dark grades. The brighter the overall intensity is - the less grades the DS2000 uses to reproduce the waveforms. I think 30-40% is probably the best trade-off.
Electro Fan:
I posted 4 more above at 0, 20, 40, and 60% intensity for comparison
Electro Fan:
Here are some intensity graded images DS1104Z and a DS2072, along with an image from a Tektronix analog scope
- not sure why the DSOs don't look a little better?
---
I added 1 more with the DS1104Z cranked up on the intensity to 71%; maybe better?
---
also added 1 more showing DS2000 being fed by function generator with signal slightly less modulated; there is a point at which as more modulation is added the waveform becomes visibly more "striated" (and less striated as modulate is decreased)
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod