Products > Test Equipment

REVIEW - Rigol DS2072 - First Impressions of the DS2000 series from Rigol

<< < (365/566) > >>

XaS:
Hi all!

I just noticed that selecting "Inverted" in the storage menu doesn't have any effect on saved PNGs. Or BMPs or JPEGs as well. I expect the saved pictures to have inverted colours (or even better, leave the colours and just change black to white and vice-versa)...

(I use SW 00.01.01.00.02 on HW 1.0.1.0.0 in a DS2072)

XaS

Hydrawerk:
It works on my Agilent scope... Here. But i find it little useful. You can always process the image in your PC.

marmad:

--- Quote from: XaS on December 10, 2013, 09:52:15 pm ---I just noticed that selecting "Inverted" in the storage menu doesn't have any effect on saved PNGs. Or BMPs or JPEGs as well. I expect the saved pictures to have inverted colours (or even better, leave the colours and just change black to white and vice-versa)...

--- End quote ---
Well, I don't know for sure if it works with FW.01.01.00.02 (never tried it) - but it certainly works for FW 02.01.00.03. Did you see the image I posted on the previous page of this thread?



One thing to remember: there are two different menus where you can chose image parameters like screen/wave region, color/gray scale, inverted, header/footer, etc:
1) Storage Menu - in which case the set parameters only affect the files you Save via the Storage Menu's Save menu item.
2) Utility / Print Setup Menu - in which case the set parameters only affect the files you Save via the Print button (either to USB storage device or PictBridge printer).

marmad:
Could someone that has the necessary gear please check if the following two bugs are still present in FW v.02.01.00.03?

1) Bus decoding does not decode the full ASCII set. Missing characters:[ . , : ; - _ ! " ยง $ % & / ( ) = ? ] - everything between square brackets (except spaces).

2) When the RS-232 baud rate is set to AUTO 57600, it is incorrect. When set to USER 57600, it operates correctly.

XaS:
Thanks marmad for your reply. As a matter of fact, the invert works on 01.01.00.02 when set in Utility/Print Setup (I use the QuickPrint button only). I just didn't destinguish between the two settings for Quick Print and regular Save. However, the settings in regular Save do have an effect on QuickPrint. The file type (PNG, BMP etc.) you set there is also used for QuickPrint.

XaS

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod