| Products > Test Equipment |
| REVIEW - Rigol DS2072 - First Impressions of the DS2000 series from Rigol |
| << < (431/566) > >> |
| tequipment:
if you email us we can send you pricing salesteam@tequipment.net Or we can just post it tomorrow if someone sends me an email reminder. Thanks Evan |
| marmad:
Rigol's changelog from last two DS2000 firmware releases. I am not responsible for any Chinglish ;) 1. E: Enhancements; C: Cancellation; M: Modification Version:00.02.01.00.03 Date:2013-11-04 1. (E) Modify the option license. 2. (E) Added the AUTO disable command. 3. (M) Fixed the data error. 4. (M) Fixed offset error when the amplitude of source is over 1.6v. 5. (M) Fixed the invalid measure issue when open delay measure. 6. (E) Added multi-language(German/Korean/Poland/Japan etc). 7. (M) Fixed the error trigger status when it is Pass/Fail mode and normal trigger. 8. (E) Hold the bandwidth limit after auto setting. 9. (M) Fixed the start data when read the data form scope. 10.(E) Optimized the AUTO trigger mode in every horizontal scale. 11.(M) Fixed the FFT center freq changing when change the horizontal scale. 12.(M) Fixed the band rate of RS232 error when it is 57600bps. Version:00.01.01.00.02 Date:2013-06-06 1. (M) Optimized the .csv file accuracy in DC coupling. 2. (M) Fixed the UART decoding error when baud rate is 10400. 3. (M) Fixed the crash when math advanced is “CH1==CH2”. 4. (M) Fixed storage and recall waveform error in ROLL mode. 5. (M) Fixed trigger delay in 500uV/div. 6. (E) Added file name when printing screen. 7. (M) Fixed measure error when delete some measure items. 8. (M) Fixed trial license lost when do self-calibration. 9. (E) Optimized source setting for DS2000-S series. |
| neslekkim:
Which usb sticks are people finding that works on the scope? In the manual of my ds2202a-s, it's written that one should not use bigger than 8GB, and that small starts to get more and more difficult to get now, and since some people have noted that not all do work, I was wondering. I guess normal ones like Kingston and SanDisk should work fine? |
| PA0PBZ:
I tried a few nonames ranging from 1 to 8 GB and even a branded 32GB one and they all worked. Not to say that anything will work but it does not seem to be very critical. |
| Altemir:
--- Quote from: neslekkim on January 13, 2014, 07:23:28 pm ---Which usb sticks are people finding that works on the scope? [...] --- End quote --- I tried to use ~18 types of USB flash disks (Sandisk, Transcend, Kingston, Toshiba, card-readers and many others...), but only 2(!) types worked very well in bootloader mode with DG4000: Chinese noname 2GB (red) and 512MB (black)! :D I used Red and black drives on Rigol DG4162, DG4062 (5 different), DS2012, MSO4024 in bootloader mode. I tried to use 4 types of disks with DS2000's bootloader, worked only noname :) For image storage all types of drives work very well, except Kingston DT-R500 (32GB) on MSO4024. Flashdrive info from red USB-disk: --- Code: ---Protocal Version: USB 2.00 Current Speed: High Speed Max Current: 100mA USB Device ID: VID = 1221 PID = 3234 Serial Number: 2010042716480359 Device Vendor: USB2.0 Device Name: Flash Disk Device Revision: 0000 Manufacturer: USB2.0 Product Model: Flash Disk Product Revision: 3.00 Chip Vendor: Micov Chip Part-Number: 3.00 Physical Disk Capacity: 1939865600 Bytes Windows Disk Capacity: 1939603456 Bytes Internal Tags: AA2E-QAHS File System: FAT ContMeas ID: 3CC6-01-00 --- End code --- Note, that Chip Vendor is Micov. VID/PID - the most common for Chinese disks. Red drive I got on some conference, and black drive I got with TI Cortex-M4 kit. Note, that boxes of both drives is identical. |
| Navigation |
| Message Index |
| Next page |
| Previous page |