Products > Test Equipment
REVIEW - Rigol DS2072 - First Impressions of the DS2000 series from Rigol
Circlotron:
--- Quote from: marmad on January 27, 2014, 05:40:22 pm ---Discussed many many times in this thread: the DS2000 (and DS1000Z) map 200 ADC values to the 400 pixel high waveform display area.
--- End quote ---
Okay, I'll try and find it. That's the trouble when threads get this long.
marmad:
--- Quote from: Circlotron on January 27, 2014, 11:48:59 pm ---Okay, I'll try and find it. That's the trouble when threads get this long.
--- End quote ---
Sorry if I came across as short - I know it can be difficult to locate things we've talked about in such a lengthy thread. It's not a very efficient system for locating information.
BTW, here's a pretty good Tektronix link on DC gain and offset accuracy (and specification) in DSOs.
Teneyes:
Can Anyone Confirm this RARE BUG??
The time base is INCORRECT with my DS2072 under these conditions
1. Timebase is set to 200ms/div
2 Memory is set to 28Mpts or 56Mpts
3. Aliasing is ON
The Display Locks up , struck on T'D and no tracing
In these pics
1.I am sweeping from 1-100Mhz ,with the 20MHz BW filter & Alaising off, OK
2.with same conditions & Aliasing ON ,
3.with same conditions,56Mpts & Aliasing ON ,
The timebase is compressed from(14x200ms)2.8Sec into (9.6x200ms)=1.92S.for 28Mpts
The timebase is compressed from(14x200ms)2.8Sec into (12x200ms)=2.4S.for 56Mpts
A setting of 50, 100 or 500ms/div are OK
This Bug occurs on FW 00.01.00.05, FW 01.01.00.02, & FW 02.01.00.03
Rory:
Yes. I can confirm.
gaijin:
Happens here also.
Only seems to happen with channel 2 enabled.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version