| Products > Test Equipment |
| REVIEW - Rigol DS2072 - First Impressions of the DS2000 series from Rigol |
| << < (454/566) > >> |
| gaijin:
yeah my mistake |
| neslekkim:
Does it exists any youtube channel that teaches how to use the scope?, or any places with good usability writeups? Say, I tried something simple, to see if there are any overshoot on my psu, I think I somewhat managed to make the trigger to work (voltage) but I couldn't get an detailed view of it.. And when I try to capture an wave, it seems like it captures like 5-7 frames? |
| gaijin:
it doesn't seem to be limited to 200ms 28Mpts I see it happening in: 200ms 1s 2s 10s 20s while these don't seem to have the problem: 500ms 5s 50s |
| Circlotron:
I have it too. Move the centre reference to the right and the end of the trace doesn't move as far as the reference. The trace actually stops scanning. I could see a glitch on the trace where I plugged the USB flash drive in and it never went away. -> The problem does not seem to occur in hi-res mode, only normal and peak detect. <- |
| luchog:
Hello: When decode zoomed data in SPI mode, the bus status is shifted respect waveforms. The sample picture was captured in 1mS scale and zoomend to 100.0nS. DS2202, [FW v.02.01.00.03] Can someone verify this? Settings: SCLK: Channel: 2 Slope: Rissing. Threshold 1.92V SDA: Channel: 1 Polarity: _|1|_ Threshold 1.9V Timeout: 87.0nS Data Bits: 8 Endian: MSB Format : Hex Thanks. Luis Gomez B. |
| Navigation |
| Message Index |
| Next page |
| Previous page |