| Products > Test Equipment |
| REVIEW - Rigol DS2072 - First Impressions of the DS2000 series from Rigol |
| << < (463/566) > >> |
| marmad:
--- Quote from: ve7xen on March 15, 2014, 10:25:02 am ---I renamed the file. New link: http://www.gotroot.ca/rigol/DS2000-03_00_00_00.7z If anyone has the actual 00.02.01.00.03 files I'd appreciate a copy to put up. The rapidshare links upthread are all broken for me. --- End quote --- I've fixed the FW links in the second post (moved all the files from rapidshare to my own server) and added the latest v.03 to the list. I haven't heard anything about this latest version, but I'm currently travelling and away from the DSO, so no chance to experiment with it for awhile. Somebody else might experiment and see if Rigol has dealt with any of the bugs listed in the above-linked post. |
| Teneyes:
FW 00.03.00 ?? Tested Math Log() function, working but the DSO locks up! See log of a sawtooth with a bit of Negative values; Note log(-negative) = 0 DSO display and controls Lock up when you try to edit expression 'Off' but USB still reports the display with a SCPI command It is looking like this is a Beta Version NO fix of Bugs 17,18.. Back to FW#00.02.01.00.03 |
| Hydrawerk:
Sometimes the intensity stays tha same even if you try to adjust it. Probably someone has noticed it here. This issue appears at certain memory length settings, I think. |
| Teneyes:
--- Quote from: Hydrawerk on March 22, 2014, 12:06:42 am ---Sometimes the intensity stays tha same even if you try to adjust it. Probably someone has noticed it here. This issue appears at certain memory length settings, I think. --- End quote --- Hi Hydrawerk I did some testing and noted that in the Video there was recording frames with the Persistence not set to Min. when in Min persistence , and Frames are recorded and the Rigol will Play back the frames at a Fix normal visible intensity (about same as Infinite persistence brightness) But when the persistence is not set to Min. the Frames are recorded at that intensity setting and you cannot adjust the playback intensity. when the intensity is set low during record, you can Barely see the waveform and when the intensity is set High during record, you can Clearly see the waveform What does persistence mean if recording frames? ( could be segmented frames) Shown below are 4 Displays: 7% intensity, 50% intensity, 100% intensity, 0% intensity but Min. Persistence I hope that helps show what happens |
| Pehtoori:
--- Quote from: Hydrawerk on March 22, 2014, 12:06:42 am ---Sometimes the intensity stays tha same even if you try to adjust it. Probably someone has noticed it here. This issue appears at certain memory length settings, I think. --- End quote --- Close the menu and you can adjust intensity. Should read the manual carefully! :-DD |
| Navigation |
| Message Index |
| Next page |
| Previous page |