Products > Test Equipment

REVIEW - Rigol DS2072 - First Impressions of the DS2000 series from Rigol

<< < (468/566) > >>

Teneyes:

--- Quote from: marmad on April 06, 2014, 08:18:28 pm ---Hi Len,
It does not decode recorded frames. I thought this was reported and confirmed here awhile ago when first reported on one of the UltraVision models.

--- End quote ---
HI Mark
It is not on your Bug list (post 3) and at first  I was thinking it was important. but as I was testing maybe the best way to monitor a serial data stream is with a long buffer(using best Mem depth), , then analyze by using the zoom feature , where the decoding does work.  and to record frames , then zoom and scan the Data.  I guess the DSO is only a preliminary device for Serial Data debugging. I am not sure when data could be missed.

Mark_O:

--- Quote from: marmad on April 06, 2014, 08:18:28 pm ---It does not decode recorded frames. I thought this was reported and confirmed here awhile ago when first reported on one of the UltraVision models.

--- End quote ---

Mark, did you miss this demonstration, where teneyes showed it working on a DS2000?  (Post capture, not real-time.)

Teneyes:
A difference between the DS2000 and DS4000

This gives me  "RS232 Trigger Holdoff Envy" 

From the User's guide:
'The adjustable range of holdoff time is from 100 ns to 10 s. Note that trigger holdoff is not available for Nth edge trigger, video trigger, RS232 trigger, I2C trigger, SPI trigger and USB trigger.'

marmad:

--- Quote from: Mark_O on April 07, 2014, 09:08:11 am ---Mark, did you miss this demonstration, where teneyes showed it working on a DS2000?  (Post capture, not real-time.)

--- End quote ---
I'm currently travelling so I haven't been following the threads closely, but I've tried decoding on segments before (using I2C) and it didn't work.

Teneyes:

--- Quote from: Mark_O on April 07, 2014, 09:08:11 am ---
--- Quote from: marmad on April 06, 2014, 08:18:28 pm ---It does not decode recorded frames. I thought this was reported and confirmed here awhile ago when first reported on one of the UltraVision models.

--- End quote ---
Mark, did you miss this demonstration, where teneyes showed it working on a DS2000?  (Post capture, not real-time.)

--- End quote ---
Hi Folks ,  I tried to re test the decoding of Frames in record mode referenced above
But I could Not   :-//    :-//
Then  Breakfast

And guess what ,   I remembered  a change I had made

This Feature is only in latest FW 00.03.00.00   :-+ , I think Rigol is smirking at me  ;D



Below are displays of Frames, recording 140 bytes burst every 3 seconds 

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod