| Products > Test Equipment |
| REVIEW - Rigol DS2072 - First Impressions of the DS2000 series from Rigol |
| << < (469/566) > >> |
| marmad:
--- Quote from: Teneyes on April 07, 2014, 06:17:44 pm ---This Feature is only in latest FW 00.03.00.00 :-+ , I think Rigol is smirking at me ;D --- End quote --- Great to hear!! ;D I've been on the road since the latest FW release, so I haven't had a chance to test it at all. |
| Teneyes:
Here I am checking the recording & decoding of 2 Channels RS232 230byte bursts at 10sec on Ch1, Ch2 continuous Note: The decoding of a new frame in playback takes about 2 seconds at this setup |
| Teneyes:
Data Decoding Limit ( RS232 test) it appears that to Decode without Errors, at least 28 Pts must be allocated for Each 'BIT' of data or else the Decode will miss a byte. To test I used: 2ms/div 70Kpts/display 89.2Kb.s all OK = 28.027 Pts/bit 89.4Kb/s Errors occuring See Pics |
| Teneyes:
EDIT: Max=900k in Latest Firmware 00.03.00.01.03 A High Speed Test of RS232 Data Recording & decoding I used: 892Kb/s (maximum trigger setting is 900000) 140Kpts/display 475 Byte Block 396 us/div 3.96 us/div Zoom Recorded 508 Frames For a Total of 241300 Bytes recorded |
| Mark_O:
--- Quote from: Teneyes on April 07, 2014, 09:07:43 pm ---Here I am checking the recording & decoding of 2 Channels RS232 230byte bursts at 10sec on Ch1, Ch2 continuous Note: The decoding of a new frame in playback takes about 2 seconds at this setup --- End quote --- I just wanted to say "thanks" for all the testing, and posting of your screen shots. Very helpful. :clap: |
| Navigation |
| Message Index |
| Next page |
| Previous page |