Products > Test Equipment
REVIEW - Rigol DS2072 - First Impressions of the DS2000 series from Rigol
<< < (511/566) > >>
marmad:
Video comparison of the Rigol DS2000 and the new Siglent SDS2000 series here:

https://www.eevblog.com/forum/testgear/review-siglent-sds2304-a-comparison-of-features-with-rigol-ds2000-series/
Teneyes:

--- Quote from: marmad on August 21, 2014, 10:21:45 am ---Video comparison of the Rigol DS2000 and the new Siglent SDS2000 series here:

--- End quote ---
It would be interested to see if the fuzzy traces with 2 channel at fast scan rates shows on the Siglent like the latest DS2000 FW. With and without SinX/X?.
On the Rigol it seems to me to be related to SinX/X and intensity levels. That have changed on latest Rigol firmware releases.
marmad:

--- Quote from: Teneyes on August 21, 2014, 07:32:10 pm ---It would be interested to see if the fuzzy traces with 2 channel at fast scan rates shows on the Siglent like the latest DS2000 FW. With and without SinX/X?.
On the Rigol it seems to me to be related to SinX/X and intensity levels. That have changed on latest Rigol firmware releases.

--- End quote ---

No problem, Teneyes. I have the Siglent for a couple of more days, so I can post some images. Can you please tell me exactly what you want to see; e.g. test signal, timebase, etc.?
Teneyes:
A while back , WIM13 noted that the traces are a bit more fuzzy when 2 channels were on after the last few FW updates.  This is with FW 00.03.00.01.03

1 , 2   Bellow I show Chan 1 Only in Vectors and Dots with 70 MHz sinewave input

3 , 4   I then show both Channels 1 & 2 on, in dots and Vectors

5       Then I show a close up of the input and the noise appears to be some sort of sine wave on the traces
6        50msec Persistence

Could this be SinX/X extrapolation??
It would nice to be able to turn off SinX/X .

or is a change in the Intensity levels with no change in the min. persistence calculation?

Teneyes:
Fuzzy Traces
here I show fuzzy traces at Persistence settings of   Min,  50ms,  100ms  , 200ms. 500ms
It looks like Min. Presistence is set to an incorrect value!!!
and is about 200ms
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod