Products > Test Equipment
REVIEW - Rigol DS2072 - First Impressions of the DS2000 series from Rigol
<< < (518/566) > >>
ted572:
Link to download Ultra Power Analyzer 00.01.00.02:  http://www.batronix.com/exe/Rigol/VISA/Ultra%20Power%20Analyzer(PC)update.rar
Ultra Power Analyzer software:  Version: 00.01.00.02,   File Size: 11.03 MB.
Requirements:  XP, Vista (32Bit + 64Bit), Windows 7 (32Bit + 64Bit), Windows 8 (32Bit  + 64Bit).
Needs: NI VISA Runtime and Ultra Sigma (min. V00.01.05.05).
See seronday's Post where he found a Option for the DS4000 using Ultra Power Analyzer, so there will be/or is one for the DS2000 also:   https://www.eevblog.com/forum/testgear/sniffing-the-rigol%27s-internal-i2c-bus/msg523679/#msg523679

marmad:

--- Quote from: ted572 on October 08, 2014, 11:59:48 am ---See seronday's Post where he found a Option for the DS4000 using Ultra Power Analyzer, so there will be/or is one for the DS2000 also:   https://www.eevblog.com/forum/testgear/sniffing-the-rigol%27s-internal-i2c-bus/msg523679/#msg523679

--- End quote ---
I played around with the spare bits on the DS2000 for a few minutes (DSBA, DSJA, DSSA), but couldn't get it to enable the PA option - either from SCPI or from the software itself. I'm using the very latest FW (3.1.0.4), so perhaps it makes a difference to downgrade first (no time to test it at the moment).

 
alank2:
marmad I wonder if they say it works with the DS2000 but perhaps it is a feature that has not been added yet.
zombie28:

--- Quote from: marmad on October 08, 2014, 01:11:51 pm ---I played around with the spare bits on the DS2000 for a few minutes (DSBA, DSJA, DSSA), but couldn't get it to enable the PA option - either from SCPI or from the software itself.

--- End quote ---

First of all, you need proper private key, like this one: 0x1C5E1F52C1E3A8
And I believe that you don't enable PA option in the scope, but in the PA itself.
marmad:

--- Quote from: zombie28 on October 09, 2014, 12:10:48 am ---First of all, you need proper private key, like this one: 0x1C5E1F52C1E3A8
And I believe that you don't enable PA option in the scope, but in the PA itself.

--- End quote ---

Foe non-A models? Because it's enabled in the PA itself?
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod