Products > Test Equipment

REVIEW - Rigol DS2072 - First Impressions of the DS2000 series from Rigol

<< < (518/566) > >>

ted572:
Link to download Ultra Power Analyzer 00.01.00.02:  http://www.batronix.com/exe/Rigol/VISA/Ultra%20Power%20Analyzer(PC)update.rar
Ultra Power Analyzer software:  Version: 00.01.00.02,   File Size: 11.03 MB.
Requirements:  XP, Vista (32Bit + 64Bit), Windows 7 (32Bit + 64Bit), Windows 8 (32Bit  + 64Bit).
Needs: NI VISA Runtime and Ultra Sigma (min. V00.01.05.05).
See seronday's Post where he found a Option for the DS4000 using Ultra Power Analyzer, so there will be/or is one for the DS2000 also:   https://www.eevblog.com/forum/testgear/sniffing-the-rigol%27s-internal-i2c-bus/msg523679/#msg523679

marmad:

--- Quote from: ted572 on October 08, 2014, 11:59:48 am ---See seronday's Post where he found a Option for the DS4000 using Ultra Power Analyzer, so there will be/or is one for the DS2000 also:   https://www.eevblog.com/forum/testgear/sniffing-the-rigol%27s-internal-i2c-bus/msg523679/#msg523679

--- End quote ---
I played around with the spare bits on the DS2000 for a few minutes (DSBA, DSJA, DSSA), but couldn't get it to enable the PA option - either from SCPI or from the software itself. I'm using the very latest FW (3.1.0.4), so perhaps it makes a difference to downgrade first (no time to test it at the moment).

 

alank2:
marmad I wonder if they say it works with the DS2000 but perhaps it is a feature that has not been added yet.

zombie28:

--- Quote from: marmad on October 08, 2014, 01:11:51 pm ---I played around with the spare bits on the DS2000 for a few minutes (DSBA, DSJA, DSSA), but couldn't get it to enable the PA option - either from SCPI or from the software itself.

--- End quote ---

First of all, you need proper private key, like this one: 0x1C5E1F52C1E3A8
And I believe that you don't enable PA option in the scope, but in the PA itself.

marmad:

--- Quote from: zombie28 on October 09, 2014, 12:10:48 am ---First of all, you need proper private key, like this one: 0x1C5E1F52C1E3A8
And I believe that you don't enable PA option in the scope, but in the PA itself.

--- End quote ---

Foe non-A models? Because it's enabled in the PA itself?

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod