Products > Test Equipment
REVIEW - Rigol DS2072 - First Impressions of the DS2000 series from Rigol
<< < (519/566) > >>
Tasman:

--- Quote from: marmad on October 09, 2014, 01:03:21 am ---
--- Quote from: zombie28 on October 09, 2014, 12:10:48 am ---First of all, you need proper private key, like this one: 0x1C5E1F52C1E3A8
And I believe that you don't enable PA option in the scope, but in the PA itself.

--- End quote ---

Foe non-A models? Because it's enabled in the PA itself?

--- End quote ---

The software comes with a 15 day trial period, after that you have to enter a registration code in the software, not the oscilloscope,  to continue using it.  Purchase of a registration code requires the oscilloscope serial number so it might be generated in a similar way to the option codes, but unlikely to be closely related.
I believe that the power analyzer option found by seronday is a not-yet-implemented firmware feature.
zombie28:

--- Quote from: Tasman on October 09, 2014, 09:32:22 am ---The software comes with a 15 day trial period, after that you have to enter a registration code in the software, not the oscilloscope,  to continue using it.  Purchase of a registration code requires the oscilloscope serial number so it might be generated in a similar way to the option codes, but unlikely to be closely related.
I believe that the power analyzer option found by seronday is a not-yet-implemented firmware feature.

--- End quote ---

Exactly, and regarding PA's license verification, all of the magic (or should I say MIRACL) happens in the RigolRunTime.dll.
etl17:

--- Quote from: marmad on October 05, 2014, 10:17:21 pm ---There is new firmware for the MSO/DS2000(A-S) series that has apparently been out for a few weeks (although I was unaware of it): #00.03.01.00.04.



I haven't had any time to test old bugs - or look for new ones (or new features) - and I'm swamped with other things at the moment. Perhaps someone else can test whether, when using the Decode bus with frames in Analyze mode, the Decode bus still sticks on the first packet of data ()? I recently reported that bug to Drieg and if it still exists in this FW version, he will report it to Rigol very soon.

The firmware is available in the usual place: post 3 of this thread.

--- End quote ---

I was using the serial decoding (rs232) yesterday and I'm happy to report that the new firmware doesn't seem to suffer from this problem anymore. 
marmad:

--- Quote from: etl17 on October 12, 2014, 02:56:04 pm ---I was using the serial decoding (rs232) yesterday and I'm happy to report that the new firmware doesn't seem to suffer from this problem anymore.

--- End quote ---

Really? You can confirm that it was decoding correctly when using Analyze mode?
etl17:
Yes!
There was a noticeable lag (maybe a second or so), but as I was moving between frames in analyze mode the decoding was eventually getting updated.    :-)
 
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod