Products > Test Equipment
REVIEW - Rigol DS2072 - First Impressions of the DS2000 series from Rigol
<< < (531/566) > >>
korlatos:
Hello,

Has anybody successfully installed and used the CAN decoder option on DS2072 (non-A) with 2.0 HW?
korlatos:
Thank you for the link, but that is a DS2072A scope. I know that Rigol added CAN decoding and 50 ohm termination to the A model, but the question is whether CAN decoder can be enabled on non-A models with current firmware (03.03.01).
EV:

--- Quote from: korlatos on February 03, 2015, 10:00:56 pm ---Thank you for the link, but that is a DS2072A scope. I know that Rigol added CAN decoding and 50 ohm termination to the A model, but the question is whether CAN decoder can be enabled on non-A models with current firmware (03.03.01).

--- End quote ---

Yes it can!
korlatos:
Great - thank you!
Teneyes:
Here is My DS2072  test with FW 00.03.03.01.00,,
I did have problems with trigger setup at 1st but finally it worked ?????
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod