| Products > Test Equipment |
| REVIEW - Rigol DS2072 - First Impressions of the DS2000 series from Rigol |
| << < (532/566) > >> |
| EV:
--- Quote from: Teneyes on February 04, 2015, 12:14:28 am ---korlatos: is the CAN decoder can be enabled on non-A models with current firmware (03.03.01). --- Quote from: EV on February 03, 2015, 11:06:01 pm ---Yes it can! --- End quote --- @EV , Do you have the Rigol CAN test PCB? Here is My DS2072 test with FW 00.03.03.01.00,, I did have problems with trigger setup at 1st but finally it worked ????? --- End quote --- Yes I have Rigol DS6000 Demo Board. The CAN signal is from it. |
| Teneyes:
If you have a Rigol DG4000 and wish to play with CAN decoding , I have Attached two ".RAF" files that you can load into the DG4000. The Arb function has 66bits , so setting the Arb period to 66us, generates a 1 Mb/s data rate. Then use the Burst function to Space the Burst of CAN messages. Below I show a 500Kb/s message (period=132us) that is decoded correctly. then I show the message with the Burst period set too Small (Fast) and the DSO does not detect the second message start and there are errors. I am not sure what the Spec is for CAN message spacing The Second file is a message with CRC error |
| EV:
--- Quote from: Teneyes on February 04, 2015, 05:53:25 pm ---If you have a Rigol DG4000 and wish to play with CAN decoding , I have Attached two ".RAF" files one can load into the DG4000. --- End quote --- Thanks for the files Teneyes! |
| Teneyes:
--- Quote from: marmad on October 30, 2012, 02:14:25 pm ---Known Firmware Bugs/Issues 22) All SCPI commands related to CAN triggering appear to be missing in the latest FW. [FW v.02.01.00.03 / FW v.03.00.01.03 --- End quote --- Just cleaning up old bug report FW 00.03.03.01.00, Does appear to Fix this bug in the short testing shown below. report to Marmad with tests. |
| Teneyes:
--- Quote from: marmad on October 30, 2012, 02:14:25 pm ---Known Firmware Bugs/Issues 17) There is a visible offset from center position when using AC-coupled Triggers (including filtered LF and HF) at lower time bases (<= 2us/div), as well as serious jitter with certain settings. [FW v.01.01.00.02 / FW v.02.01.00.03 / FW v.03.00.01.03] --- End quote --- As most of EEVBLOGers know, that after Dave Jones (#683) got on Rigol's case about AC-triggering , the Bugs were Fixed :D |
| Navigation |
| Message Index |
| Next page |
| Previous page |