| Products > Test Equipment |
| REVIEW - Rigol DS2072 - First Impressions of the DS2000 series from Rigol |
| << < (537/566) > >> |
| lr1234:
Downgrade to relative stable ver 00.03.03.01 do not work . Some SCPI also. >:D Maybe He Xiaohua going to Siglent? |
| EV:
I managed to load FW ver 00.03.03.01, but I had to do it twice. First time was not succesful. It was loaded quite short time and there was no system button under utility menu (or I did not find it). |
| Muxr:
Pretty disappointing that they can't catch these issues before they release the firmware. You'd think their regression tests would have a frame rate / waveforms-per-sec test on all the common options. Kind of amateur hour if you ask me. |
| marmad:
--- Quote from: lr1234 on June 25, 2015, 09:55:28 am ---HighRes on > 1ms qause long freezes with only 1 ch in use. --- End quote --- What memory setting(s)? Other pertinent settings? BTW, do you understand that when you have HighRes on at > 1ms that the bandwidth of your DSO is less than 22kHz (much less if at even slower timebases)? Mostly useful only for specific things; i.e. audio work or low frequency. --- Quote from: arny on June 25, 2015, 01:47:14 pm ---its also freezes in dot mode. --- End quote --- What memory settings? Timebases? If people want to report bugs, it's not very constructive unless you report any/all settings that it occurs with so that others can try to replicate it or find precise parameters. EDIT: Actually, the bandwidth is less than 22kHz with HighRes >1ms/div. Changed above. |
| lr1234:
Default settings,test signal on ch1 Memory auto Only 1Ch enabled (for 2Gs/s) If HighRes or Dot Mode changing time base lover as 500us cause freeze. 2Gs/s memory arithmetic’s with bugs. Temporary help- enabling second channel(2Gs/s/2) |
| Navigation |
| Message Index |
| Next page |
| Previous page |