| Products > Test Equipment |
| REVIEW - Rigol DS2072 - First Impressions of the DS2000 series from Rigol |
| << < (544/566) > >> |
| EV:
Orange, thanks for the link! |
| Circlotron:
I was just thinking, the battery for the RTC will eventually need replacing. Is this hard to do? I remember some early pc motherboards had the battery inside a clock module and it made life difficult. Hopefully it is just a CR2032 or similar, out in the open on the main board, and the scope doesn't lose any calibration data when the battery does quit. |
| JDubU:
--- Quote from: Circlotron on October 16, 2015, 09:34:51 pm ---I was just thinking, the battery for the RTC will eventually need replacing. Is this hard to do? I remember some early pc motherboards had the battery inside a clock module and it made life difficult. Hopefully it is just a CR2032 or similar, out in the open on the main board, and the scope doesn't lose any calibration data when the battery does quit. --- End quote --- There is a CR3032 in a battery holder on the back of the main DS2000 PCB: |
| Muxr:
I just received a 03.04.01.00 for my DS2000, haven't tried it yet. http://rev.muxr.org/rigol/DS2000Update.zip There are also release notes and upgrade procedure: http://rev.muxr.org/rigol/ |
| CustomEngineerer:
Received an email from rigoltech.com email address today with a link to the new firmware and release notes for the DS2 Series. When I click the link for the release notes it downloads a file named "Release Notes DS2v3_3_2_6 6-17-15.pdf" which is the previous firmware and only contains the release notes for up to that revision. So no release notes for the new version. I downloaded the firmware linked in the email and get a zip file named DS2000Update.zip. When I unzip this file I get another zipped file named DS2000FWUpdate.zip. When I unzip this one it creates a directory/file named DS2000(DSP)Update_00.03.04.01.00/DS2000Update.GEL. At least it appears to contain the correct firmware, though not sure why its double zipped. I haven't bothered installing it yet because I haven't seen anyone else report that they have installed it and I am currently not having any problems with v00.03.03SP2. |
| Navigation |
| Message Index |
| Next page |
| Previous page |