Products > Test Equipment

REVIEW - Rigol DS2072 - First Impressions of the DS2000 series from Rigol

<< < (558/566) > >>

whotopia:
I tried your (bonanz's) procedure with the latest firmware 00.03.05.     I also have the same problem with serial number DS2A0000000001 on my DS2072A. 

However in my case I needed to do a full 32MB memory dump for rigup 0.4 to find any keys. 
But with the keys Rigup finds, it cant seem to generate codes.    In fact the executable consistently just crashes.  ( I have tried both windows and linux)
I suspect it has something to do with further broken/incorrect data in my RAM dump. 

I'd like to try it against someone else's dump.   Is there anyone willing to share a full memory dump with me? 
If there is anyone who can offer some ideas on how to restore serial number, it would also be much appreciated.

Thanks!

EDIT 1:   SUCCESS!!
 So in reviewing the output of "rigup.exe scan SCPI-Data.scpi" I just realised that the executable returns RC5KEY1,RC5KEY2,XXTEAKEY,PUBKEY,PRIVKEY  but the SERIAL field is missing in my case.  That's what was causing the RIGUP LICENSE command to fail.     So for me it turns out the solution was as simple as to add a line to my keys file:

   SERIAL:         DS2A0000000001

So steps were to :
1. run .\rigup.exe scan SCPI-Data.scpi > EC-keys.txt
2. add the SERIAL line above
3. run .\rigup.exe license ./EC-keys.txt NS8H

And presto that worked.

Still if anyone knows how to restore the correct serial number I'd much like to know.   


Daruosha:
It might be a silly question, but whatever i did, I couldn't figure out how to measure pulse counts of a signal within specified courses. My cheap DS1000Z does it easily, but on DS2000z, i'm screwed.

Any suggestion?

pa3bca:
The 1000Z also doesn't count pulses, it only counts pluses... :-DD

Daruosha:
Bummer...

I cannot believe this. For a second I thought, it doesn't have the ability to measure pulses, but wondered no way, all cheap scopes have this measurement. Surely this one has too.

Daruosha:


--- Quote from: pa3bca on January 05, 2017, 05:12:43 pm ---The 1000Z also doesn't count pulses, it only counts pluses... :-DD

--- End quote ---


Hahaha, took a minute to got your point. I think in the last firmware they have fixed the spelling. Not sure, too busy to double check that.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod