Products > Test Equipment

First picture on EEVblog of the new R&S MXO4 series oscilloscope :)

<< < (42/60) > >>

Martin72:
I really, really like this scope.... ;) 8)

EEVblog:

--- Quote from: Sighound36 on May 11, 2023, 05:06:25 pm ---Jury is out on the functionality of the screen layout, while the drop down menu's are comprehensive they are also a little distracting for myself.

--- End quote ---

I find the UI a bit "all over the shop" is the best description. Some thing are great, others you ask why they did that.

Sighound36:
Hi Dave

I would suggest that is a fair assement of what I'm seeing here as well. It's like they have tgaken the other scope manufucturers GUI's and borrowed certain aspects and stuck it togther. Some items are great others are little more than an after thought, zoom discriptor box would be nice as well. It's not that intuitive as well as it's my 6th day with the MX04. These can be rectified in FW so its not a earth shattering issue I feel.

Some indepth look at cabling on Leo Bodnar clock (usb powered) using the 12 bit zoom on both the R&S and Lecroy same setting on both scopes and using both BNC outputs simultaneously. No HD or ERES filters applied using max bandwidth on both scopes 5GS/s SR & 2.5K samples on each scope HTB 50ns / VTA 250mV with 960mV offset

Cable A is a very well known quality T&E 50Ohm coax type BW 6GHz. Cable B is more suitable for higher daylight number upto 26Ghz both are 50Ohm impedance terminations.



Sighound36:
Some images of MX04 using the fully active ZD-10 differential probe on a low level clock signal in conjunction with the FFT both in peak table  & peak on waveform mode. I did notice that the if you either of these two options the wave form pattern plus the harmonic marker lines & FFT itself pulsate (very fast) possible in time with the spectrum sweep speed?  Its distracting in the least. The peak table so far as I can work out itsn't moveable on the screen (happy to be assisted here though!)
Probe set up and calibration simple and intutitive scope recognised all the different probes I have with the MX04 no problem as it should be.
Still amazed by how quiet this scope is, its uncanny  8) Second monitor output is spot on and a very useful, the Lecroy's have this feature in 4K, Rigol does as well though 1080P, either way its handy to have imho.

Sighound36:
This board will not let post this review, I have tried splitting up the posts into two still comes back with this error

No profanity in there or didgy links any ideas?

"Please try again. If you come back to this error screen, report the error to an administrator."

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod