Products > Test Equipment
First picture on EEVblog of the new R&S MXO4 series oscilloscope :)
<< < (59/60) > >>
Neoname:

--- Quote from: tooki on August 28, 2024, 06:50:53 pm ---I don’t mean the keypad in the dialog. I mean the actual on-screen keyboard found in the main menu, circled in red in the screenshot below.

--- End quote ---

I just checked for you, and sadly no keyboard comes up while inside that dialogue box if you touch or even if mouse click that button on your screenshot.

I also tried plugging in a USB keyboard and the LAN-Web Control interface, and both allow you to enter spaces just fine to type your logical expression out.
tooki:
Out of curiosity, does the on-screen keyboard work if you open it before opening the Zone Trigger > Logic Operator dialog?
Neoname:

--- Quote from: tooki on August 28, 2024, 09:36:37 pm ---Out of curiosity, does the on-screen keyboard work if you open it before opening the Zone Trigger > Logic Operator dialog?

--- End quote ---

Also no, it closes itself as you open the Trigger condition dialogue box.
tooki:
Ah, gotcha. Thanks for testing. My MXO4 is at work and it’s midnight, so not easy for me to test on my own right this second. :p
tooki:

--- Quote from: tooki on August 28, 2024, 05:46:56 pm ---I was at the automation expo today and ran into the R&S rep that sold us the MXO4 I have at work. We were discussing and playing with the zone trigger. He mentioned that it somewhat overlapped (in how it’s designed) with the mask test feature available on some other R&S scopes. That got us curious and we poked around all the menus of the demo MXO4 to see if mask testing has been added. Before you get your hopes up: it hasn’t.

But it sure looks like it may be coming, because we found an entire menu full of other features that don’t seem to be implemented yet. To get to it, you have to edit the toolbar, and then there are “mask test” and “add mask” buttons you can add. Once enabled, pressing one of them opens a toolbar with mask testing and a menu with a bunch of other things, including a spectrogram. But actually trying to do anything doesn’t work. Trying to draw a mask just gives an error. I cannot rule out that these only appear with a demo all-features license installed, but I can say that these buttons/menu do not appear on an MXO5 (with demo license installed) with the prior firmware version.

--- End quote ---
FYI, I tested this on the MXO4 at work and the same non-functional mask testing buttons and associated menu are present, so they are not dependent on a demo license. Since those menus all say "mouse" in them, I also tried using a USB mouse, but it made no difference.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod