Products > Test Equipment
Fluke 123 Scopemeter and battery replacement
mucek:
Here's my mod for LiIon battery (based on info in this forum) as well as replacing CCFL lamp with LED backlight. The difference is enormous! Now F123 is easily readable in every condition! :) There is plenty of images with description ...
http://iksor.si/en/2017/04/03/fluke-123-modifikacija-na-liion-in-led-osvetlitev/
Regards,
Gregor
p.s. We are still working on our webpage, especially english one is pretty "lonely" ... Don't look too much around ;)
abid0011:
thanks for reply.
as u say this unit is pretty old.
what do u think fluke 123 vs the fluke 87v or 88v multimeters.
does the fluke 123 better than these two millimeters
thank u
mucek:
You can't compare those two! F123 is Scopemeter, which is an oscilloscope and digital multimeter in one unit, when 87 (and similar) are "only" multimeters. I do owe also F279 and I try to avoid it, as it takes quite some time to startup. I use F179 instead usually.
Regards,
Gregor
rsivan:
--- Quote from: mucek on April 03, 2017, 08:11:00 am ---Here's my mod for LiIon battery (based on info in this forum) as well as replacing CCFL lamp with LED backlight. The difference is enormous! Now F123 is easily readable in every condition! :) There is plenty of images with description ...
http://iksor.si/en/2017/04/03/fluke-123-modifikacija-na-liion-in-led-osvetlitev/
Regards,
Gregor
p.s. We are still working on our webpage, especially english one is pretty "lonely" ... Don't look too much around ;)
--- End quote ---
very interested the led mod!... also :-+ for nice schematic with my mod,unfortunately cannot try led mod because selled my F123 6 months ago to a friend which very happy with,
I got a discount from supplier for F125B (colors model) and I could not resist....I'm very happy with, this time no need hack (for now), battery life is good and already li-ion
abid0011:
hi i replace the fluke 2000 mah with the 4000 mah battery.
what i did is i remove the wired connection from the original battery pack and installed on the 4000 mah 1.2 volts 4 cells.
now the problem is after charging the battery the battery drains very quickly.
does the battery need completer refresh .
when select the refresh option it shows 12 hours.
any suggestion.
thank u
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version