Products > Test Equipment
Fluke 123 Scopemeter and battery replacement
<< < (15/18) > >>
DMM123:

--- Quote from: none on May 19, 2019, 08:55:43 am ---
@ DMM123
I think the information about thermistor and fuse is somewhere in this thread, or on the Fluke forums (try the links I posted previously) - I've seen it before.

EDIT:
These threads might be of interest:
https://www.eevblog.com/forum/testgear/usb-powered-fluke-123/
https://www.eevblog.com/forum/testgear/fluke-123/ (power supply)

--- End quote ---

Thank you, but I still don't see the thermistor value (beta), the part number, or the range of the thermistor in temperature.  I have contacted a thermistor manufacturer and given them 40 measured values at different temperatures with the kOhm readings on the old battery.  I will post what they say.
Jcm05:
Hello,

My Scopemeter does not work after battery exchange.
After seeing verified I found a polarity reversal of + and - on the battery.

This has caused a short internal circuit to my scopemeter and it does not work even connected to the power supply.
The 3 resistors R504, R506 and R507 have burned.
I replaced them but he still does not work.

Have you ever encountered the same problem and what is the solution?

Thanks for your help.
DMM123:

--- Quote from: DMM123 on May 19, 2019, 01:11:32 pm ---
--- Quote from: none on May 19, 2019, 08:55:43 am ---
@ DMM123
I think the information about thermistor and fuse is somewhere in this thread, or on the Fluke forums (try the links I posted previously) - I've seen it before.

EDIT:
These threads might be of interest:
https://www.eevblog.com/forum/testgear/usb-powered-fluke-123/
https://www.eevblog.com/forum/testgear/fluke-123/ (power supply)

--- End quote ---

Thank you, but I still don't see the thermistor value (beta), the part number, or the range of the thermistor in temperature.  I have contacted a thermistor manufacturer and given them 40 measured values at different temperatures with the kOhm readings on the old battery.  I will post what they say.

--- End quote ---

Well, so far no answer.  I've emailed a couple of times but no response.  Initially they said they would have an answer in a couple of weeks.  Patience, I hope, is the key.
iurius:
Thank you very very much!
alwanuel:
Hi, would you please consider a YouTube video, what you did is really useful, please consider to share it properly. Cheers.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod