Products > Test Equipment
Fluke 177 failed and need support to repair
(1/6) > >>
Chinhdc:
Hi Gentlements,

As you know, Fluke measurement equipments are always be the first technician choice, and me too. I have been using the Fluke Digital Multimeter model 177 for some years after putting the 8 years used Kyoritsu 1009 to the store due to some malfunctions and the unstable results.
In a beautiful day, i took the Fluke 177 to measure its inside battery (9VDC), i turned the knob to right function and the probes is in right positions. Of course the measure result was nothing and i turned off and turned on (the purpose is checking the voltage of the inside battery whether it was good or bad because i often used continuity function that the buzzer used much energy that the battery exhausted quickly after a short time of replacing).
After the measure, the Multimeter became failure. When turned on, changed into any function, the LCD display as attacted pictures with buzzer (Of course without probes) as picture from 1 to 3.

I have browsed on Web to find help but hopeless.

So, I would hope and highly appreciate any idea to solve the problem of my Digital Multimeter to be back normally.
(Attracted pictures from 4 to 7 are inside of the multimeter for more details).

Thank you so much for reading and giving support.

(Due to the side of post limited, i will post more pictures on comments!)
Chinhdc:
More pictures about my case with inside PCB

I'm looking forwards hearing supports soon.
Chinhdc:
More pictures about my case
AVGresponding:
I'm confused; the Fluke 177 has a low battery indicator, so there's no need to perform a test on the battery, the meter will tell you when it's necessary to replace it.

Are you saying you measured the battery by removing the battery cover and probing it with the meter while it was powering the meter?
Chinhdc:
To AVGresponding;

Yes,i did it, because some other models of Kyoritsu can measure like this.
Now, what can i do? Can you help me more?
Thank you!
Navigation
Message Index
Next page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod