Products > Test Equipment
Fluke 179 missing segments on the diplay
<< < (3/4) > >>
mwb1100:

--- Quote from: NoisyBoy on September 07, 2024, 07:04:03 pm ---If you bought it new through the proper channel...

--- End quote ---

It's worth contacting them regardless.  My understanding is that they don't always ask for documentation on the purchase.
NoisyBoy:
That is good to know, agree it is worth a try regardless.
nightfire:
In Photo #3, it displays "OL" ->Meaning in that case you are out of range. Normal Error message here.
Might it have occurred that you are on a manual range in that case?
J-R:
The Fluke warranty typically only applies to the original owner, and this was purchase used, although maybe listed as "new, open box"?

I think whether you can get away with this path will depend on whether Fluke has any previous owner registered in their systems for that serial number.
wraper:
Inspect LCD under magnification to verify there is no tiny barely visible crack in the glass on the area where conductive film traces go to the contact pads.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod