Products > Test Equipment

Fluke 179 missing segments on the diplay

<< < (3/4) > >>

mwb1100:

--- Quote from: NoisyBoy on September 07, 2024, 07:04:03 pm ---If you bought it new through the proper channel...

--- End quote ---

It's worth contacting them regardless.  My understanding is that they don't always ask for documentation on the purchase.

NoisyBoy:
That is good to know, agree it is worth a try regardless.

nightfire:
In Photo #3, it displays "OL" ->Meaning in that case you are out of range. Normal Error message here.
Might it have occurred that you are on a manual range in that case?

J-R:
The Fluke warranty typically only applies to the original owner, and this was purchase used, although maybe listed as "new, open box"?

I think whether you can get away with this path will depend on whether Fluke has any previous owner registered in their systems for that serial number.

wraper:
Inspect LCD under magnification to verify there is no tiny barely visible crack in the glass on the area where conductive film traces go to the contact pads.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod