| Products > Test Equipment |
| Fluke 189 firmware |
| << < (3/3) |
| daisizhou:
--- Quote from: rauldm on September 10, 2024, 03:04:18 am --- Hi I have two Fluke 189 meters, one meter it has 2.01 firmware, other it has 2.02, exist update software? like 289. Regards --- End quote --- Normally I wouldn't update the firmware because it's not an Apple phone. Updating the firmware will only make things worse,In other words, even if the update does not improve any functions or performance |
| Njk:
--- Quote from: coromonadalix on September 10, 2024, 11:52:16 pm ---mmm was it when you power the meter with an pressed button ? sorry don't have theses anymore ... but i did saw something once --- End quote --- Firmware version: Push down the RANGE button and simultaneously turn the meter on. Static display test: Push down the HOLD button and turn the meter on. Animated display test: Push down the HOLD and BLUE buttons simultaneously and turn the meter on and wait a bit, must be hold down the buttons. https://www.eevblog.com/forum/testgear/fluke-187 |
| Navigation |
| Message Index |
| Previous page |