Products > Test Equipment
Fluke 189 firmware
daisizhou:
--- Quote from: rauldm on September 10, 2024, 03:04:18 am --- Hi I have two Fluke 189 meters, one meter it has 2.01 firmware, other it has 2.02, exist update software? like 289. Regards
--- End quote ---
Normally I wouldn't update the firmware because it's not an Apple phone.
Updating the firmware will only make things worse,In other words, even if the update does not improve any functions or performance
Njk:
--- Quote from: coromonadalix on September 10, 2024, 11:52:16 pm ---mmm was it when you power the meter with an pressed button ? sorry don't have theses anymore ... but i did saw something once
--- End quote ---
Firmware version:
Push down the RANGE button and simultaneously turn the meter on.
Static display test:
Push down the HOLD button and turn the meter on.
Animated display test:
Push down the HOLD and BLUE buttons simultaneously and turn the meter on and wait a bit, must be hold down the buttons.
https://www.eevblog.com/forum/testgear/fluke-187
Navigation
[0] Message Index
[*] Previous page
Go to full version